Parker Double Tube Clamp RBP1-112

  • RS-stocknr. 309-8353
  • Fabrikantnummer RBP1-112
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Tube Clamp Double

Series B Tubeclamps by Parker designed to enable fixing of straight and bent, tubes and hoses. The clamp body is a square/open design with a ribbed bore enabling secure fixing while ensuring a high degree of sound deadening and vibration damping. Ideal for normal mechanical stress, they are available as a twin tube clamp in five standard sizes for nominal mechanical requirements.

Features and Benefits

• Reset capability
• High-tensile strength
• High abrasion resistance
• Resistant to cold
• DIN 3015
• Operating temperature range -30°C to 90°C
• Polypropylene clamp body with steel weld plate, zinc plated steel top plate and M6 x 30 mm zinc plated steel clamp screws

//media.rs-online.com/t_line/L727581-01.gif
Specificaties
Kenmerk Waarde
Number of Tubes Held Double
For Tube Outside Diameter 12mm
Clamp Spacing 0.9m
Body Material PP
Maximum Operating Temperature +90°C
Maximum Tube Outer Diameter 12mm
Minimum Operating Temperature -30°C
35 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
145 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
2,468
(excl. BTW)
2,986
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
€ 2,468
€ 12,34
25 - 45
€ 2,392
€ 11,96
50 +
€ 2,316
€ 11,58
*prijsindicatie
Related Products
Manual flaring tools are used to produce the ...
Description:
Manual flaring tools are used to produce the required 37° flare at the hydraulic tube end to ensure an effective single seal point between the nose of the Triple-Lok flared tube fitting and the tube. These tools are used in ...
Triple-Lok 37° flared fittings are for use with ...
Description:
Triple-Lok 37° flared fittings are for use with metric tube. Their simplicity, compact design and ease of assembly have led to their widespread choice for applications that use fluid power in motion control. The steel fittings are ideally suited for ...
Series A Tubeclamps by Parker designed to enable ...
Description:
Series A Tubeclamps by Parker designed to enable fixing of straight and bent, tubes and hoses. The clamp body is in two equal halves with a ribbed bore enabling secure fixing while ensuring a high degree of sound deadening and ...
RS Pro Tube Clamps, designed to enable fixing ...
Description:
RS Pro Tube Clamps, designed to enable fixing of straight and bent, tubes and hoses. The clamp body is a square/open design with a ribbed bore enabling secure fixing while ensuring a high degree of sound deadening and vibration damping. ...