Hirose standard 50Ω Surface Mount UFL Connector, Receptacle, Solder Termination

  • RS-stocknr. 175-7510
  • Fabrikantnummer U.FL-R-SMT-1(10)
  • Fabrikant Hirose
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Hirose UFL Series Ultra Small Surface Mount Coaxial Receptacle Connectors

UFL series ultra small and lightweight SMT coaxial receptacle connectors with a space saving PCB footprint of 7.7 mm² and weighing just 15.7 mg. These UFL receptacles have a high frequency performance from DC to 6 GHz with a VSWR of 1.3 to 1.5 maximum. This performance makes them ideal for use in a wide range of miniature devices. Supplied on tape and reel, these receptacles can be positioned using automatic placement equipment. When mated with the UFL plug assemblies a tactile click is produced that confirms that a secure electrical and mechanical connection has been made. A range of mated heights from 1.9 mm to 2.4 mm are possible when using this UFL receptacle with the UFL plugs.

Features and Benefits

• Small PCB footprint of 7.7 mm²
• Lightweight 15.7 mg design
• High frequency performance from DC to 6 GHz
• VSWR of 1.5 to 1.5 max
• Suitable for automatic placement
• Audible click for mating assurance

Applications

UFL SMT coaxial cable connectors are suitable for use in miniature devices that require high frequency transmission.
Applications include:
- Mobile phones,
- Wireless communication devices
- Electronic measuring instruments,
- GPS, wireless LAN and Bluetooth

Nominal mated height of 1.9 or 2.3mm, 2.4mm (Max. 2.0 or 2.4mm, 2.5mm)
Small mounting area:
The receptacle occupies an area of 7.7mm2.
Light weight:
Receptacle: 15.7mg
Supports high frequency up to 6GHz:
To meet the frequency requirements of a wide variety of miniature devices, the connectors offer high frequency performance from DC to 6GHz, with a V.S.W.R. of 1.3 to 1.5 max.
Automatic board placement:
Packaged on tape-and-reel the receptacles can be placed with vacuum nozzles of the automatic placement equipment.
Plugs are terminated with ultra-fine coaxial (fluorinated resin insulated) cable:
Standard ultra-fine coaxial cable of 0.81mm diameter (single braid shielding) is used for the plug termination, assuring secure and stable connections.
Simple connector mating / unmating:
Use of available extraction tool assures correct disconnection of the plug and receptacle.
Verification of the fully mated condition:
Tactile click sensation confirms fully mated condition, assuring complete electrical and mechanical connection.
Halogen-free (Receptacle, plug(HF type)):

Specificaties
Kenmerk Waarde
Gender Female
Body Orientation Straight
Termination Method Solder
Mounting Type Surface Mount
Size Standard
Body Plating Silver
Operating Temperature Range -40 → +90 °C
Impedance 50Ω
Operating Frequency 6GHz
Contact Plating Gold
Contact Material Brass
865 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4420 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
1,046
(excl. BTW)
1,266
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 70
€ 1,046
€ 5,23
75 - 245
€ 0,866
€ 4,33
250 - 495
€ 0,726
€ 3,63
500 - 1245
€ 0,664
€ 3,32
1250 +
€ 0,576
€ 2,88
*prijsindicatie
Verpakkingsopties
Related Products
Hubner + Suhner MBX cable connectors are for ...
Description:
Hubner + Suhner MBX cable connectors are for applications requiring cable to board interfacing, durable MBX cable connectors with around 100 mating cycles and low engagement force. Frequency DC - 6 GHz50Ω impedanceWorking voltage 250 Vrms - 50 Hz.
Microminiature coaxial connectors designed for monitoring video and ...
Description:
Microminiature coaxial connectors designed for monitoring video and broadcast applicationsRapid push-pull snap-on mating action, compatible with 50Ω versionsSmaller in size than equivalent SMB versions, and ideal for use in equipment with restricted spaceSuitable for use with RG178 cableRecommended crimp tool ...
The MMBX series of connectors allow a quick ...
Description:
The MMBX series of connectors allow a quick connection with a minimum space requirement. The use of in-series adaptors permits axial misalignment of 0.6 mm radial misalignment 0.4, for ease of connector assembly. Compatible with pick and place machinesSuitable for ...
HUBER+SUHMNER MMCX connectors are designed to be used ...
Description:
HUBER+SUHMNER MMCX connectors are designed to be used where the smallest possible dimensions have to be achieved. The reliable 'snap-on' coupling mechanism ensures the electrical parameters are consistently reproduced. The SMT connectors are suitable to all reflow-soldered SMT PCBs where ...