TE Connectivity Straight Cable Mount UHF Connector, Solder Termination, RG141 A/U, RG58 C/U

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

TE Connectivity UHF Connector - Professional Grade Solder Plug

Professional grade UHF straight plug connector with a solder/clamp coaxial termination, PTFE dielectric, silver plated brass body and silver plated brass centre contact. This UHF straight plug connector has a white silicone rubber gasket and a brass coupling nut and is suitable for use with coaxial cable type RG-58 C/U, RG-141 A/U, URM43, URM76 and KX15.

IEC 169-12 nickel-plated brass UHF connectors

A wide range of low-cost connectors for low-frequency applications up to 200 MHz. These connectors are available in both crimp and locking versions, and can be used with cables of different diameters. The range of available adaptors also allows them to be used with small-diameter coaxial cables. Bodies are in nickel-plated brass and the internal contact springs are in beryllium copper.
Connectors are delivered with mounting instructions.

Specificaties
Kenmerk Waarde
Gender Male
Body Orientation Straight
Termination Method Solder
Mounting Type Cable Mount
Body Plating Silver
Cable Type RG141 A/U, RG58 C/U
Minimum Operating Temperature -65 °C
Operating Frequency 0 → 500MHz
Maximum Operating Temperature +165 °C
Contact Plating Silver
Contact Material Brass
2050 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Box of 25)
9,34
(excl. BTW)
11,30
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
25 +
€ 9,34
€ 233,50
*prijsindicatie
Related Products
The Mini UHF series is a miniaturised UHF ...
Description:
The Mini UHF series is a miniaturised UHF model wit a defined wave impedance of 50 Ohm. Its use is limited mainly to mobile wireless applications and it is recommended for use in cars. The plug connection is characterised by ...
A series of connectors to MIL specifications with ...
Description:
A series of connectors to MIL specifications with high quality materials and PTFE insulation. Non-constant impedance design, suitable for use up to 500V peak and 200MHz, or up to 500MHz with diminished performance. These coaxial connectors are designed for use ...
A wide range of low-cost connectors for low-frequency ...
Description:
A wide range of low-cost connectors for low-frequency applications up to 200 MHz. These connectors are available in both crimp and locking versions, and can be used with cables of different diameters. The range of available adaptors also allows them ...
Originally intended for use as a video connector ...
Description:
Originally intended for use as a video connector in radar applications, UHF coaxial connectors are general purpose units developed for use in low frequency systems from 0.6 - 300 MHz. Invented for use in the radio industry in the 1930’s, ...