Sick Ultrasonic Sensor Barrel M30 x 1.5, 200 → 1300 mm, PNP, 5-Pin M12 Connector IP67

  • RS-stocknr. 700-2889
  • Fabrikantnummer UM30-213112
  • Fabrikant Sick
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

UM30-212 & UM30-213 Series

SICK UM30 ultrasonic sensors provide reliable detection results where optical sensors reach their limits. The high measurement accuracy provided by internal temperature compensation, along with colour-independent object detection and immunity to contamination all ensure reliable operation, even under the most challenging conditions. Even adverse ambient conditions such as dust, dirt, or fog hardly affect the measurement result. Whether it is position detection, distance measurement or the detection of solid, powdered or liquid substances. UM30 Ultrasonic sensors from SICK demonstrate their reliability and precision in virtually any application.

Features and Benefits

· Flexible adaptation to application requirements due to numerous configuration options and adjustable sensitivity
· Ultrasonic measuring principle with maximum reliability through intelligent analysis of measured values
· Easy system integration due to the compact design
· Reliable operation in dusty environments
· Distance to object operating mode (e.g. for applications such as height detection)
· Three operating modes: distance to object (DtO), window (Wnd), or object between sensor and background (OBSB)
· Integrated temperature compensation ensures high measurement accuracy
· Complementary switching outputs immediately signal faults
· Synchronization and multiplex mode prevent mutual interference of sensors providing reliable measurements

How do ultrasonic proximity sensor work?

Ultrasonic sensors emit a sonic pulse and monitor the signal that is reflected back. Where there is a difference in measurement, such as an object being detected, an output signal is given based on the specification the sensor is configured to. The time required for the pulse to go from the sensor to detect the object and come back again is measured, evaluated and converted into the distance.

Technical specification
Supply Voltage 12-30Vdc
Reproducibility 0.15% of final value
Accuracy ±2% of final value
Ripple ±10%
No load current consumption ≤70mA
Standby delay 2 seconds
Connection Type Plug, M12, 5 pin
Ingress protection IP65
Operating temperature range -20° to +70°C
Housing material Nickel plated brass
Specificaties
Kenmerk Waarde
Detection Range 200 → 1300 mm
Output Type PNP-NO/NC
Body Style Barrel
Thread Size M30 x 1.5
Transducer Frequency 200kHz
Diameter 30 mm
Maximum DC Voltage 30V
Supply Voltage 9 → 30 V dc
Terminal Type M12 - 5 Pin
IP Rating IP67
Housing Material Nickel Plated Brass
Reverse Polarity Protection Yes
Short Circuit Overload Protection Yes
Minimum Operating Temperature -25°C
Dimensions 84 x 30 mm
Response Time 110 ms
Length 84mm
Switching Frequency 6 Hz
Maximum Operating Temperature +70°C
Switching Current 200 mA
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
3 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
332,00
(excl. BTW)
401,72
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 332,00
Related Products
Each miniTwin stick contains both the sender and ...
Description:
Each miniTwin stick contains both the sender and receiver elements, each symmetrically mounted in one half of a housing and separated by a central synchronisation beam. The diagram shows two identical miniTwin units offset by 180° working as both sender ...
The OsiSense XU general purpose photo-electric sensor from ...
Description:
The OsiSense XU general purpose photo-electric sensor from Schneider is available in single mode or multi-mode versions in the following formats: Reflex (XUB 1); Thru-beam (XUB 2); Diffuse (XUB 4); Diffuse with adjustable sensitivity (XUB 5); Polarised reflex (XUB 9). ...
The OsiSense XU general purpose photo-electric sensor from ...
Description:
The OsiSense XU general purpose photo-electric sensor from Schneider is available in single mode or multi-mode versions in the following formats: Reflex (XUB 1); Thru-beam (XUB 2); Diffuse (XUB 4); Diffuse with adjustable sensitivity (XUB 5); Polarised reflex (XUB 9). ...
The Brad I/O module is a PNP type ...
Description:
The Brad I/O module is a PNP type M12 4-pin and M12 5- pin B connection type used with PROFINET controller IO-Link. It is designed for factory automation machine builders which brings versatility and cost-savings to complex system designs through ...