FTDI Chip FT232RQ-REEL USB to Serial UART RS232, RS422, RS485 UART 3MBd, 5 V, 32-Pin, QFN

  • RS-stocknr. 730-0168
  • Fabrikantnummer FT232RQ-REEL
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

FT232R - USB to Serial UART with Clock Generator, FTDI Chip

The FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic.

A unique number, the FTDIChip-ID, is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle. It can then be used to protect customer application software from being copied. Royalty-free drivers for the most common operating systems are available from FTDI website. http://www.ftdichip.com

The FT232R is available in compact 28-pin SSOP (RS 406-580) and 32-pin QFN (RS 730-0168) packages.

Features & Benefits

• Single chip USB to asynchronous serial data transfer interface.
• Entire USB protocol handled on the chip. No USB-specific firmware programming required.
• Fully integrated 1024-bit EEPROM storing device descriptors and CBUS I/O configuration.
• Fully integrated USB termination resistors.
• Fully integrated clock generation with no external crystal required plus optional clock output
• Data transfer rates from 300 Baud to 3 MBaud (RS422, RS485, RS232) at TTL levels.
• 128 B receive buffer and 256 B transmit buffer utilising buffer smoothing technology to allow for high data throughput

Applications

USB Industrial Control
USB bar code readers
USB Digital camera interface
USB wireless modems
PDA to USB Transfers
USB Card readers
USB FLASH card readers and writers
USB Audio and low bandwidth video data transfer

Specificaties
Kenmerk Waarde
Number of Channels per Chip 1
Standard Supported RS232, RS422, RS485 UART
Transmit FIFO 256B
Receive FIFO 128B
Maximum Data Rate 3MBd
Mounting Type Surface Mount
Package Type QFN
Pin Count 32
Typical Operating Supply Voltage 5 V
Dimensions 5 x 5mm
Length 5mm
Width 5mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
141 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
797 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
3,88
(excl. BTW)
4,69
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 3,88
25 - 49
€ 3,69
50 - 99
€ 3,16
100 - 249
€ 2,99
250 +
€ 2,67
Verpakkingsopties
Related Products
Provides the high sampling rate - up to ...
Description:
Provides the high sampling rate - up to 2MSa/s each channel - required for transient signal applications such as sonar analysis. Dedicated ADCs enable simultaneous signals acquisition for phase-sensitive applications. High speed USB 2.0Simultaneous acquisition of multiple data pointsMultifunction capabilities ...
High input/output voltage range meets demanding requirements for ...
Description:
High input/output voltage range meets demanding requirements for industrial applications such as driving relays and actuators. Limit applications include industrial control and automation, isolated data communication, logic level interface and laboratory automation. All models are highly reliable and excellent ...
The Freecom Mobile Drive Classic 3.0 has no ...
Description:
The Freecom Mobile Drive Classic 3.0 has no cooling fan, which ensures quiet operation at all times. Simply plug it into any computer’s USB port and take your spreadsheets, documents, movies, photo’s or music anywhere you go.Ultra compact, easy-to-use and ...
The OEM-MICODE Reader Boards are complete Read/Write system ...
Description:
The OEM-MICODE Reader Boards are complete Read/Write system for ISO14443A Mifare 1k, Mifare 4k, Ultralight and ICODE. The Boards have an integrated PCB track antenna, LEDs, TTL serial and I/O interface. Also included on the board is power supply filtering, ...