FTDI Chip FT230XS-R UART Interface 3MBd, 5 V, 16-Pin, SSOP

  • RS-stocknr. 757-0010
  • Fabrikantnummer FT230XS-R
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip

The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface.
They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.
Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.
The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.

- Fully integrated MTP memory, clock generation, AVCC filtering, Power-On Reset (POR) and LDO regulators.
- Configurable CBUS I/O Pin Options.
- Asynchronous and Synchronous Bit Bang Modes.
- Operates at between +3.3 V and +5.25 V. A nominal operational mode current of 8 mA and a nominal USB suspend mode current of 125 μA.

Specificaties
Kenmerk Waarde
Number of Channels per Chip 1
Standard Supported RS232, RS422, RS485, SIE, UART
Transmit FIFO 512B
Receive FIFO 512B
Maximum Data Rate 3MBd
Transmitter and Receiver FIFO Counter Yes
Mounting Type Surface Mount
Package Type SSOP
Pin Count 16
Typical Operating Supply Voltage 5 V
Dimensions 0.197 x 0.157 x 0.059in
Length 5mm
Width 0.157in
Height 1.5mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
234 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1390 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 2)
1,88
(excl. BTW)
2,27
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 28
€ 1,88
€ 3,76
30 - 148
€ 1,74
€ 3,48
150 - 748
€ 1,67
€ 3,34
750 - 1498
€ 1,42
€ 2,84
1500 +
€ 1,385
€ 2,77
*prijsindicatie
Verpakkingsopties
Related Products
The MAX14819 low-power, dual-channel, IO-Link® master transceiver with ...
Description:
The MAX14819 low-power, dual-channel, IO-Link® master transceiver with sensor/actuator power-supply controllers is fully compliant with the latest IO-Link and binary input standards and test specifications, IEC 61131-2, IEC 61131-9 SDCI, and IO-Link 1.1.2. This master transceiver also includes two auxiliary ...
A range of Ethernet communications controllers, transceivers and ...
Description:
A range of Ethernet communications controllers, transceivers and switching ICs. Line/Speakerphone circuitSerial InterfaceEnhanced voice switchingBackground noise monitoringTx- and Rx-gain programmableDigital volume control of Rx signalsDual softclippingLoudspeaker amplifier for loudhearing and handsfreeAutomatic ...
For Fault-Tolerant Applications:MAX3430: ±80V Fault-Protected, Fail-Safe, 1/4- Unit ...
Description:
For Fault-Tolerant Applications:MAX3430: ±80V Fault-Protected, Fail-Safe, 1/4- Unit Load, +3.3V TransceiverFor Low-Voltage Applications:MAX3362: +3.3V, High-Speed Transceiver in a SOT23 PackageFor Multiple Transceiver Applications:MAX3030E-MAX3033E: ±15kV ESD-Protected, +3.3V, Quad TransmittersMAX3040-MAX3045: ...
Ideal for Camera ApplicationsWorks with Low-Cost 50Ω Coax ...
Description:
Ideal for Camera ApplicationsWorks with Low-Cost 50Ω Coax Cable and FAKRA Connectors or 100Ω STPError Detection/Correction9.6kbps to 1Mbps Control Channel in I2C-to-I2C Mode with Clock-Stretch CapabilityBest-in-Class Supply Current: 90mA (max)Double-Rate Clock for Megapixel CamerasCable Equalization Allows 15m ...