FTDI Chip FT230XQ-R UART Interface 3MBd, 5 V, 16-Pin, QFN

  • RS-stocknr. 923-1597
  • Fabrikantnummer FT230XQ-R
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip

The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface.
They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.
Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.
The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.

- Fully integrated MTP memory, clock generation, AVCC filtering, Power-On Reset (POR) and LDO regulators.
- Configurable CBUS I/O Pin Options.
- Asynchronous and Synchronous Bit Bang Modes.
- Operates at between +3.3 V and +5.25 V. A nominal operational mode current of 8 mA and a nominal USB suspend mode current of 125 μA.

Specificaties
Kenmerk Waarde
Number of Channels per Chip 1
Standard Supported RS232, RS422, RS485, SIE, UART
Transmit FIFO 512B
Receive FIFO 512B
Maximum Data Rate 3MBd
Transmitter and Receiver FIFO Counter Yes
Mounting Type Surface Mount
Package Type QFN
Pin Count 16
Typical Operating Supply Voltage 5 V
Dimensions 4 x 4 x 0.75mm
Length 4mm
Width 4mm
Height 0.75mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
5000 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (On a Reel of 5000)
1,332
(excl. BTW)
1,612
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
5000 +
€ 1,332
€ 6.660,00
*prijsindicatie