- RS-stocknr.:
- 185-0231
- Fabrikantnummer:
- BM92A34MWV-ZE2
- Fabrikant:
- ROHM
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 185-0231
- Fabrikantnummer:
- BM92A34MWV-ZE2
- Fabrikant:
- ROHM
Datasheets
Wetgeving en compliance
Productomschrijving
BM92A34MWV-Z is a full function USB Type-C Power Delivery (PD) controller that supports USB Power Delivery using baseband communication. BM92A34MWV-Z includes support for the PD policy engine and communicates with an Embedded Controller or the SoC via host interface. It supports SOP, SOP and SOP" signalling, allowing it to communicate with cable marker ICs, support alternate modes.
USB Type-C Specification Compatible
USB PD Specification Compatible (BMC-PHY)
Supports Display Port Control
Automatic Mode without Ext-MCU
Two Power Path Control using N-ch MOSFET Drivers with Back Flow Prevention
Type-C Cable Orientation Detection
Built-in VCONN Switch and VCONN Controller
Direct VBUS Powered Operation
Supports DFP/UFP/DRP Mode
Supports Dead Battery Operation
Connected the required initial voltage is 9 V
USB PD Specification Compatible (BMC-PHY)
Supports Display Port Control
Automatic Mode without Ext-MCU
Two Power Path Control using N-ch MOSFET Drivers with Back Flow Prevention
Type-C Cable Orientation Detection
Built-in VCONN Switch and VCONN Controller
Direct VBUS Powered Operation
Supports DFP/UFP/DRP Mode
Supports Dead Battery Operation
Connected the required initial voltage is 9 V
Specificaties
Kenmerk | Waarde |
---|---|
Number of Transceivers | 1 |
IC Type | Controller IC |
Protocols Supported | USB C |
Power Supply Type | Single |
Typical Single Supply Voltage | 4.75 to 20 V |
Mounting Type | Surface Mount |
Package Type | UQFN40V5050A |
Pin Count | 40 |
Dimensions | 5 x 5 x 0.9mm |
Height | 0.9mm |
Length | 5mm |
Maximum Operating Temperature | +105 °C |
Width | 5mm |
Minimum Operating Temperature | -30 °C |