726 Series USB Dust Cover, ABS Material

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

USB Accessories

A range of socket Dust Covers / Caps from Wurth for various USB types.

Stock number 763-5754 works as a panel support for USB A type sockets that overhang the edge of a PCB and abut a panel, such as stock number 748-0882. Stock number 763-5748 can then be used to form a Dust Cover with the panel front.
Stock number 763-5741 is used to provide a Dust Cover between a PCB mounted USB A type Plug and a panel face (for a standard USB A socket cover see stock number 763-5748l).

Wurth USB 3.0 PCB Connectors and Cable Assemblies

The WR-COM connector series from Wurth is one of the first USB 3.0 connectors in the market that complies with specifications of the USB Implementers Forum. The USB 3.0 architecture allows transmission speeds up to 5 Gbits/s which are 10x faster than the previous standard. This USB 3.0 dual-bus architecture is both backwards and forward compatible (USB 3.0 devise in a 2.0 port). The benefits of using USB 3.0 are reduced transmission times and power consumption. The USB 3.0 ports are characterised by their Blue colour and will physically accept 2.0 hardware despite having more pins.

Specificaties
Kenmerk Waarde
Gender Female
Socket Type USB B
Series 726
Material ABS
Colour Black
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 14-02-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Bag of 1000)
0,323
(excl. BTW)
0,391
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
1000 - 1000
€ 0,323
€ 323,00
2000 +
€ 0,275
€ 275,00
*prijsindicatie
Related Products
From Lapp, there are high quality dust caps ...
Description:
From Lapp, there are high quality dust caps available to ensure that connectors are sealed against environmental ingress even when unmated. This ensures protection against wear and tear even in challenging environments. The dust caps are nickel plated and have ...
RS Pro protective dust caps for use with ...
Description:
RS Pro protective dust caps for use with a wide range of RS Pro USB metal and plastic panel mount connectors. The IP67 rated black thermoplastic dust covers prevent water and dust ingress when panel mount USB connectors are not ...
Dust covers for use with MUSBR series panel ...
Description:
Dust covers for use with MUSBR series panel mount USB C receptacles. The high temperature silicone rubber dust caps have a brass nickel plated bushing with a 2.57 mm diameter hole for mounting. The dust covers provide extra protection to ...
This range of dust covers are designed to ...
Description:
This range of dust covers are designed to fit Feedthrough connectors. They simply push CLIFF into the front of the connector to reduce ingress of dust and dirt. They fit both our plastic and metal feedthroughs. There is a small ...