Microchip Technology MIC2027-1YM, Quad USB Power Switch High Side, 180mΩ, 2.7 V min. 16-Pin, SOIC

  • RS-stocknr. 177-0778
  • Fabrikantnummer MIC2027-1YM
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

The MIC2027 and MIC2077 are quad high-side MOSFET switches optimized for general-purpose power distribution requiring circuit protection. The MIC2027/77 are internally current limited and have thermal shutdown that protects the device and load. The MIC2077 offers "smart" thermal shutdown that reduces current consumption in fault modes. When a thermal shutdown fault occurs, the output is latched off until the faulty load is removed. Removing the load or toggling the enable input will reset the device output.

150mΩ maximum on-resistance per channel
2.7V to 5.5V operating range
500mA minimum continuous current per channel
Short-circuit protection with thermal shutdown
Thermally isolated channels
Fault status flag with 3ms filter eliminates false assertions
150mΩ maximum on-resistance per channel
2.7V to 5.5V operating range
500mA minimum continuous current per channel
Short-circuit protection with thermal shutdown

Specificaties
Kenmerk Waarde
Switch Type USB High Side Power
Number of Outputs 4
Switch On Resistance 180mΩ
Mounting Type Surface Mount
Package Type SOIC
Pin Count 16
Current Limit 1A
Dimensions 9.93 x 3.94 x 1.48mm
Length 9.93mm
Width 3.94mm
Height 1.48mm
Maximum Input Voltage 5.5 V
Maximum Operating Temperature +85 °C
Minimum Input Voltage 2.7 V
Minimum Operating Temperature -40 °C
Minimum Output Current 500mA
130 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 5)
0,948
(excl. BTW)
1,147
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
€ 0,948
€ 4,74
*prijsindicatie
Verpakkingsopties
Related Products
The MIC33050 is a high efficiency 600mA PWM ...
Description:
The MIC33050 is a high efficiency 600mA PWM synchronous buck (step-down) regulator with internal inductor featuring HyperLight Load®, a patent-pending switching scheme that offers best-in-class light load efficiency and transient performance while providing very small external components and low output ...
The UPD350 is a highly integrated small form ...
Description:
The UPD350 is a highly integrated small form factor USB Type-C/PD controller compliant with USB Type-C™ specification and USB Power Delivery specification v.3.0. UPD350 provides cable detection and orientation, and implements baseband communication with a partner USB Type-C/PD Device. The ...
ROHM's secondary LDO regulators were designed to maximize ...
Description:
ROHM's secondary LDO regulators were designed to maximize device characteristics and provide stable operation through low power consumption, increased miniaturization, and low noise. 1A fixed output types are offered for local power supplies that feature an output voltage accuracy of ...
The FTDI NerO-LP1 is an enhanced design for ...
Description:
The FTDI NerO-LP1 is an enhanced design for the Arduino UNO processor board featuring a switchmode +5V regulator for greater efficiency amongst other detail improvements. Like the UNO, it is CE and FCC certified and is suitable for commercial as ...