RS PRO Pneumatic 2 port Ball Valve with Pneumatic Actuator, Double Acting, 3 → 10bar

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: IT
Productomschrijving

Pneumatic Actuator with s.64 Ball Valve

RS Pro pneumatic actuator with s.64 ball valve.

Features and Benefits

• ISO 5211 direct mount on valve
• NAMUR pads for direct mount of solenoid and limit switch
• Pilot ring for perfect alignment of shaft and stem
• Extruded aluminium body
• Nickel plated steel shaft
• Stainless steel fasteners
• High tensile long life return springs
• Visual position indicator
• Indoor or outdoor installation
• Single travel stop on one end
• Fast field conversion between double-acting and spring-return
• Minimum ambient temperature while actuator at rest: -35°C

Specificaties
Kenmerk Waarde
Number of Ports Supported 2
Actuator Type Pneumatic
Function Double Acting
Operating Pressure Range 3 → 10bar
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13-07-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
436,47
(excl. BTW)
528,13
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 436,47
Related Products
RS Brand reduced-bore quarter-turn stainless steel ball valves ...
Description:
RS Brand reduced-bore quarter-turn stainless steel ball valves for the control of flow. Available in a variety of sizes. Reduced port, 1/4" - 3" (DN8 - DN80)W.P: 1000WOG (PN63)W.T: -20°C to 200°C (-4°F to 392°F)Investment castingBlow-out proof stemAnti-static device (option)Locking ...
RS screwed end ball valves for the control ...
Description:
RS screwed end ball valves for the control of flow. Available in a variety of sizes. Investment castingBlow-out proof stemLocking deviceISO 5211 Mounting padTA-Luft approved (option)Length conform to DIN 3202/4-M3-2013SM3 (option)Thread type: ASME B1.20.1 (NPT) DIN2999 and BS21 ISO7/1 and ...
RS Brand Stainless Steel Screwed End Ball Valves ...
Description:
RS Brand Stainless Steel Screwed End Ball Valves for the control of flow. Full port 1/4" to 4" (DN8 to DN100)W.P: 1000 WOG (PN63)W.T: -20°C to 200°CInvestment castingBlow-out proof stemLocking deviceISO 5211 Mounting padThread type: ASME B1.20.1 (NPT) DIN2999 & ...
Body Hot pressed brassEnd cap Hot pressed brassBall ...
Description:
Body Hot pressed brassEnd cap Hot pressed brassBall Brass chrome platedSeat ring P.T.F.E.Body seal P.T.F.E.Stem BrassStem ring Viton*O-ring NBR 70Enclosure Rated Weather proof IP67Motor 24VdcMulti voltage 24Vdc, 95-240VacLimit Switches 2 x open/close SPDT, 250Vac 6A ratingAuxiliary Limit Switches 2 x ...