ifm Electronic Vibration Sensor 20 mA -30°C → +125°C, Dimensions 22 (Dia.) x 63.25 mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

VTV Series Vibration switches

Ifm electronic VTV series vibration transmitters monitor machinery and equipment according to ISO 10816. The robust design, high IP Rating and high temperature rating are suitable for use in harsh environments. The VTV sensors measure the true RMS velocity of non-rotating component surfaces, values are then transmitted as an analogue signal (4...20 mA) directly to the PLC.

Continuous vibration monitoring according to ISO 10816
2-wire loop powered
4...20 mA signal output
True RMS monitoring of the overall velocity
Robust metal housing provides high protection rating.
M12 connector

ifm electronic Vibration Senors

Specificaties
Kenmerk Waarde
Maximum Shock / Vibration 25mm/s
Maximum Current 20 mA
Maximum DC Voltage 32V
Contact Resistance 720Ω
Width 22 (Dia.)mm
Depth 63.25mm
Minimum Operating Temperature -30°C
Maximum Operating Temperature +125°C
Dimensions 22 (Dia.) x 63.25 mm
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
24 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
217,10
(excl. BTW)
262,69
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 217,10
Related Products
Ifm Electronic TA series temperature sensor is a ...
Description:
Ifm Electronic TA series temperature sensor is a compact universal transmitter with a 4 mA to 20 mA current output. The TA sensors Pt1000 measuring element achieves high precision with scalable parameters that can bet set via an integrated IO-Link ...
Ifm Electronic TAD series temperature sensors use two ...
Description:
Ifm Electronic TAD series temperature sensors use two different sensor elements which monitor each other to ensure that sensor drift is immediately detected and reliably diagnosed. The TAD sensors measuring elements achieve high precision with scalable parameters that can bet ...
Efector 800 range of Vibration Sensors. Vibration monitor ...
Description:
Efector 800 range of Vibration Sensors. Vibration monitor VKConnection via M12 connectorVibration monitor Vrms to DIN ISO 10816Switching outputs:1 x normally closed DC PNP and 1 x analogue 4 → 20 mASwitching status LED (yellow)Power LED (green)Non latching short circuit ...
Glass and metal bodied versions offer bounce-free switching ...
Description:
Glass and metal bodied versions offer bounce-free switching and quick break action even when tilted slowly. Contacts make and break with vibration motion and return to the open state at rest. Unless otherwise stated, the angle by which the switch ...