Assemtech Vibration Sensor 1 A -37°C → +100°C, Dimensions 20.7 x 8.2 mm

  • RS-stocknr. 235-7566
  • Fabrikantnummer CM4400-1
  • Fabrikant Assemtech
Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: US
Productomschrijving

Movement/Vibration Switch

Steel tin plated housing
Contacts make and break with vibration motion and return to the open state at rest
Non position sensitive
Inert gas and hermetic sealing protects contacts

Mercury Tilt, Vibration & Movement

Glass and metal bodied versions offer bounce-free switching and quick break action even when tilted slowly. Contacts make and break with vibration motion and return to the open state at rest. Unless otherwise stated, the angle by which the switch must be tilted to ensure contact operation (operating angle), must be approximately 1.5 to 2 times the stated differential angle. The differential angle is the measure from the “just closed” position to the “just open” position. Inert gas and hermetic sealing protects contacts

Warning

  • Mercury is a toxic substance. Do not cut open or incinerate these devices. Dispose of safely in accordance with prescribed practice and local regulations.
Specificaties
Kenmerk Waarde
Maximum Current 1 A
Maximum AC Voltage 120V
Contact Resistance
Length 20.7mm
Minimum Operating Temperature -37°C
Maximum Operating Temperature +100°C
Dimensions 20.7 x 8.2 mm
82 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
5,29
(excl. BTW)
6,40
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 5,29
Related Products
This range of M8 cylindrical inductive proximity sensors ...
Description:
This range of M8 cylindrical inductive proximity sensors from the BALLUFF BES series are designed to be used in a wide variety of metal detection applications with in industrial environments. Pre cabled or connector Flush shielded or non-flush unshielded 3 ...
Ifm electronic VTV series vibration transmitters monitor machinery ...
Description:
Ifm electronic VTV series vibration transmitters monitor machinery and equipment according to ISO 10816. The robust design, high IP Rating and high temperature rating are suitable for use in harsh environments. The VTV sensors measure the true RMS velocity of ...
The range of shock sensors from Murata are ...
Description:
The range of shock sensors from Murata are designed for high performance acceleration sensors for vibration and mechanical shock. They are designed for a wide range of applications including; consumer equipment, healthcare, security, tyre pressure monitoring and industrial automation.
The TE Connectivity MEAS MiniSense 100 series are ...
Description:
The TE Connectivity MEAS MiniSense 100 series are economical, cantilever-type vibration sensors. Loaded by a mass, these sensors feature a high level of sensitivity at low frequencies and can be used in applications that detect impact or continuous vibration. Constructed ...