Molex 33A-100-10 Video, Data & Voice Wiring Tester of Miswire, Open Circuit, Short Circuit

  • RS-stocknr. 215-6391
  • Fabrikantnummer 33A-100-10
  • Fabrikant Molex
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Molex UTP and STP Cable Tester

From Molex the 33A-100-10 data wiring tester, designed to check the integrity of 2, 3 and 4 pair UTP and STP channels. With a unique 3-in-1 design the sturdy tester features built-in modular jack connectors for USOC, 568A and 568B wiring sequences.

The robust multi-function cable tester comprises of two handheld parts, the master unit and the remote unit. This provides a convenient method for end-to-end testing of pre-installed cabling. By connecting the master and the slave unit to each end of the cable the tester automatically verifies the correct wiring sequence. A continuously sequencing LED display gives a clear visual indication of any shorts opens, reversals and mis-wire within the wiring system

Powered by a 9-volt alkaline battery this portable tester is an essential piece of test equipment for any design, installation or test engineer’s toolbox

Features and Benefits

• Built-in modular jacks on both units for testing USOC, 568A and 568B cabling
• Verification of correct wiring sequence
• Pin-point accuracy of cable continuity and sequencing of 1, 2, 3 and 4 pair shielded and unshielded twisted pair cabling
• The LED display provides a clear view and visual indication of mis-wires, shorts, open circuit and reversed wiring
• Manufactured from high-quality impact resistant materials
• A compact and lightweight device
• Master and remote units conveniently snap and lock together when not in use
• Proximity switch disconnects the battery when not in use saving valuable power.
• Requires a 9 volt alkaline battery see part number 826-4435

Applications

The Molex 33A-100-10 wiring tester can be used in any applications where UTP and STP cabling is or is going to be installed. Ensuring structured data cables are wired correctly is essential as incorrect wiring can be extremely costly to rectify. Some of the most common applications and environments are

• Data centres
• Schools and colleges
• Factories and warehouses
• Office blocks
• Hospitals and laboratories
• Manufacturing sites

Specificaties
Kenmerk Waarde
Cable Type STP, UTP
Test Type Miswire, Open Circuit, Short Circuit
Display Type LED
Power Source Battery
Battery Type 9V
Weight 284g
Width 60mm
Height 144mm
35 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
149,00
(excl. BTW)
180,29
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 149,00
Related Products
The Teledyne LeCroy Mercury T2C adds USB Type-C ...
Description:
The Teledyne LeCroy Mercury T2C adds USB Type-C and Power Delivery 2.0 and 3.0 support to the industry's smallest and most affordable hardware-based USB 2.0 protocol analyser. The Mercury T2C combines the de-facto standard CATC Trace display, USB class decoding ...
The Teledyne LeCroy Mercury T2C adds USB Type-C ...
Description:
The Teledyne LeCroy Mercury T2C adds USB Type-C and Power Delivery 2.0 and 3.0 support to the industry's smallest and most affordable hardware-based USB 2.0 protocol analyser. The Mercury T2C combines the de-facto standard CATC Trace display, USB class decoding ...
The Mercury T2 is the industry's smallest, most ...
Description:
The Mercury T2 is the industry's smallest, most affordable hardware-based USB 2.0 protocol analyser that combines the defacto standard CATC Trace display with powerful analysis features. The pocket-sized Mercury T2 is bus powered and is controlled using any Windows PC. ...
Teledyne LeCroy’s Advisor T3 is an ultra portable ...
Description:
Teledyne LeCroy’s Advisor T3 is an ultra portable SuperSpeed USB analyser that delivers market leading accuracy at an extraordinary price. Designed to put precision USB protocol test tools in the hands of every engineer, the Advisor includes all the essential ...