John Drummond Voltage Indicator & Proving Unit Kit 3.5mA 700V ac

Wetgeving en compliance
Land van herkomst: PH

John Drummond Test Lamp & Proving Unit Kit

The John Drummond test lamp and proving unit includes an MTL15 test lamp coupled with a PD690 proving unit and the TC69 combination carry case. Safe electrical work requires the use of a voltage indicator or test lamp that has been proved with a proving device before and after use. This TC69 soft carry case ensures that your proving device is always on hand and provides the simplest solution for implementing safe isolation practices for electrical test equipment. For convenience and to save time, the proving unit can be used without having to remove it from the case. The PD690 voltage and power output are matched to the MTL15 to illuminate all voltage bands and prove the test lamp is functioning correctly. The 1.5V alkaline batteries are required for the power supply to the proving unit.

Features and Benefits

• Four illumination bands up to 690V
• 1000V CAT IV safety rating
• Right angled and straight GS38 compliant probes
• High intensity long life LED indication
• 360° viewing angle


• Wind turbines installations
• Energy intensive process industries
• High power variable speed drives
• UPS systems


• IP64 rated
• BS EN61010

Kenmerk Waarde
Test Current Rating 3.5mA
Output Voltage 700V ac
Kit Contents Instructions, 1 L-Shaped Prod and Instructions to GS38, 1 Long Angled Prod, 2 Long Straight Prods, 2 Straight Prods, 6 x 1.5V AA Alkaline Batteries
Display Type LCD
Calibrated RSCAL
Battery Type Alkaline Battery
Power Source Battery
Dimensions 84 x 143 x 50mm
Weight 400g
Height 50mm
Length 84mm
Maximum Operating Temperature +40°C
Minimum Operating Temperature -10°C
Width 143mm
6 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 328,70
Related Products
The Fluke 345 measures a wide range of ...
The Fluke 345 measures a wide range of electrical parameters for troubleshooting power disturbances in single- and three phase electrical loads. With a bright colour display to see waveforms and trends, a low-pass filter to remove high frequency noise, and ...
Confidently take reliable readings with the True-rms, Fluke ...
Confidently take reliable readings with the True-rms, Fluke 353 digital clamp meter; the tool of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. ...
Fully IEC1010-1 and IEC101-2-032 compliant for circuits up ...
Fully IEC1010-1 and IEC101-2-032 compliant for circuits up to 500V phase to phase or 300V phase to earth CAT III or 600V CAT II30mA and 300mA ranges for leakage current measurement0.01mA resolution on 30mA range30A and 300A ranges for power ...
Carlo Gavazzi DPC01 & PPC01 series of monitoring ...
Carlo Gavazzi DPC01 & PPC01 series of monitoring relays provide the user with a comprehensive variety of monitoring options such as phase sequence, loss & asymmetry along with under & over voltage with separate set point adjustment. Offers the facility ...