TB118KIT1 Voltage Indicator & Proving Unit Kit <3.5mA 600V ac/dc, Kit Contents 8mm Clip Locked Out Tag, EZ650 Earth

  • RS-stocknr. 188-2931
  • Fabrikantnummer TB118KIT1
  • Fabrikant Martindale
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: PH
Productomschrijving

The new kit combines easy to use tools for live voltage indication and earth loop verification together with fused spur and mcb locking off devices in a high quality soft carry case. The all in one kit includes the VIPD138 voltage indicator & proving unit, the EZ650 earth loop and polarity checker for socket and spur testing and the LOKKITGAS1 which enables gas service engineers to securely lock off circuits before carrying out work on appliances connected to the mains power supply. In the latest update to TB118 it describes how it’s important to demonstrate the effectiveness of the earthing for Class 1 equipment before carrying out any work. This is recognized as a safety requirement for most service teams working on the installation and maintenance of mains appliances. This type of device has been defined by the Health & Safety Executive as being capable of displaying the range of numerical values into which the earth fault loop impedance falls in addition to basic polarity testing. The EZ650 is an advanced socket tester that is easy to use and includes test leads for connection to spurs as well as sockets for this application.

Specificaties
Kenmerk Waarde
Model Number TB118KIT1
Test Current Rating <3.5mA
Output Voltage 600V ac/dc
Kit Contents EZ650 Earth Loop Impedance and Socket Tester, LOK10 Yellow MCB Lock, LOK11 Red MCB Lock, LOK7 Slimline MCB Lock, LOKFS1 Fused Spur Lock, LOKMP Black Marker Pen, PAD10R Padlock with Unique Key, PD440 Proving Device, TC68 Soft Carry Case, TC69 Soft Carry Case, TC88 Soft Carry Case, VI13800 Voltage Indicator, 8mm Clip Locked Out Tag, 10mm Clip
Battery Type AA
Power Source Battery, Mains
Dimensions 205 x 67 x 27mm
Weight 130g
Height 27mm
Length 205mm
Maximum Operating Temperature +40°C
Width 67mm
Minimum Operating Temperature -10°C
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
371,00
(excl. BTW)
448,91
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 371,00
Kalibratie-opties
Related Products
From RS PRO, this IPM242 clamp meter serves ...
Description:
From RS PRO, this IPM242 clamp meter serves as a first line of defence for spot checking and verifying system conditions before deploying more specialised tools. Featuring a full range of diagnostic capabilities including phase sequence, power & power factor, ...
Standard: IEC 1010-1 Cat. III, deg. 2. Hall ...
Description:
Standard: IEC 1010-1 Cat. III, deg. 2. Hall effect current probes allowing measurement of direct or alternating currents, without disturbing or breaking the circuit.Multimeter (PAC 20 and 21) or oscilloscope (PAC 22) output.Voltage output.Zero adjustment by means of a thumb ...
Phoenix Contact single phase Quint Power supply units ...
Description:
Phoenix Contact single phase Quint Power supply units are suitable for all AS-interface systems with up to 2.4A. The PSU’s have integrated filters meaning that the modulated data flow is not affected, and also an integrated ground fault detection function. ...
The Cressall single voltage AC6 for testing portable ...
Description:
The Cressall single voltage AC6 for testing portable generators is a resistive type device with the capacity of 6kW, 230VAC. It has a 0 to 6kW in 333W switched steps of 333W. 666W, 3 x 1kW, and 1 x 2kW ...