John Drummond MTL10 Voltage Indicator & Proving Unit Kit 3.5mA 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc, Kit

Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: PH
Productomschrijving

Drummond MTL10 Test Lamp and Proving Unit Safety Kit

Voltage level indicator & proving unit safety kit comprising:

MTL10 Drummond Test Lamp

Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V

PD440 Proving Unit:

Essential to check the MTL10 for correct operation prior to working on electrical circuits
The PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations
Operating Temperature: -10°C to +40°C at max 70% RH
Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
Dimensions: 143 x 84 x 50mm
Weight: 400g approx including battery
6 AA batteries (required, see stock no. 591-225)

Supplied with

Handy carry case, right angled probe tip, two straight tips and instructions

Mains Voltage Indicators - Contact

Specificaties
Kenmerk Waarde
Model Number MTL10
Test Current Rating 3.5mA
Output Voltage 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc
Kit Contents Case, Martindale PD440 440V Proving Unit, MTL10 Test Lamp
Calibrated RSCAL
Power Source Mains
Dimensions 213 x 112 x 72mm
Weight 320g
Height 72mm
Length 213mm
Maximum Operating Temperature +55°C
Width 112mm
Minimum Operating Temperature -10°C
7 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
245,00
(excl. BTW)
296,45
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 245,00
Related Products
From RS PRO, this IPM242 clamp meter serves ...
Description:
From RS PRO, this IPM242 clamp meter serves as a first line of defence for spot checking and verifying system conditions before deploying more specialised tools. Featuring a full range of diagnostic capabilities including phase sequence, power & power factor, ...
The 8031F tester indicates phase sequence by a ...
Description:
The 8031F tester indicates phase sequence by a rotating disc which gives clear feedback. A system of lamps also indicates open circuit phases.Small, lightweight and compact in design with no exposed metal parts. A test button is incorporated in the ...
The PC15250 Phase Rotation Tester is a simple ...
Description:
The PC15250 Phase Rotation Tester is a simple and quick 3 phase continuity and rotation indicator. The phase sequence indicator gives a fast and effective identification of worn or unmarked cables and ensures 3-phase outlets and machines are wired correctlyRetractable ...
The new kit combines easy to use tools ...
Description:
The new kit combines easy to use tools for live voltage indication and earth loop verification together with fused spur and mcb locking off devices in a high quality soft carry case. The all in one kit includes the VIPD138 ...