Martindale MARVIPD150 Voltage Indicator & Proving Unit Kit <3.5 mA @ 1000 V ac/dc 700V, Kit Contents Batteries,

  • RS-stocknr. 865-4756
  • Fabrikantnummer MARVIPD150
  • Fabrikant Martindale
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: PH
Productomschrijving

Martindale VIPD150 Voltage Indicator VI-15000 and Proving Device

Before carrying out any maintenance or repairs on electrical equipment it is essential that all circuitry is isolated and safe to work on. Electricians, engineers, and technicians must be safe in the knowledge that all checks have been made, in accordance with the Electricity at Work Regulations.

The Martindale VIPD150 kit is a 1000V CAT IV approved kit that complies with BS EN61243-3:2010 and GS38. The electrical test kit comprises of the VI-15000 voltage indicator and the PD690 proving unit. Supplied in the TC69 combination soft carry case with convenient neck strap, the superior quality kit ensures your essential test equipment is always at hand and ready to use.

VI-15000 Voltage Indicator

Robustly designed, VI-15000 voltage indicator has a CATIV 1000V safety rating and incorporates super bright LED’s providing indication for AC and DC voltages ranging from 50 volts up to 690 volts. This ensures complete compliance with the health and safety recommendations for safe working in all BS EN61010 categories. With retractable probes and heavy-duty double insulated leads, the VI-15000 is GS38 compliant, the ideal tool for conducting safe isolation procedures.

Features and Benefits

• Ergonomically designed for maximum comfort
• Tests voltages up to 1000V AC/DC
• Safety category CAT IV 1000V
• Automatic AC/DC detection
• GS38 and BS EN61243-3 compliant
• Heavy-duty double insulated leads
• Retractable safety shrouds
• In-built high wattage, current limiting resistor protection
• Long-life bright LED's

PD690 Proving Unit

The Martindale PD690 is a proving device rated to 700 Volts. Tough and lightweight, the battery-powered unit enables voltage indicators to be fully checked in compliance with the latest Health and Safety recommendations. The proving unit is compatible with all Martindale voltage indicators including the VI-15000 and VI13800 models. In addition, this device is suitable for proving any two-pole testers with LCD or LED indication, illuminating LED’s up to 690V.

Features and Benefits

• Constructed from high-quality tough materials
• 700V AC
• Long-life battery
• Low Battery indication
• Can be used to check Drummond and other filament test lamps
• Compatible with standard Multimeters
• Supplied with 6 x 1.5V AA alkaline batteries

Applications

Designed to suit a vast array of applications, voltage indicators, and their proving units are used to check electrical equipment is functioning safely and at the levels, they should be. It is vital voltage levels are checked regularly. The test equipment can help engineers identify potential faults and to prepare for any maintenance or repair. Some of the most common areas are

• Electrical contracting
• Power and utility plants
• Industrial engineering
• Electrical Test Equipment

FAQ

Q : Are there any additional accessories or spares available?
A : Yes, RS Components offer the following part numbers;
122-6550 for the TC69 Soft Carry Case
757-5084 for the LOKKIT1 Safety Lock Out Kit
865-4734 for the VI-15000 Voltage Indicator
719-0894 for the PD690 Proving Unit
744-5199 for the 1.5 Volt Alkaline Batteries (for the Proving Unit)

Martindale Lock-Off Kits, Voltage Indicators and Proving Units

Specificaties
Kenmerk Waarde
Model Number MARVIPD150
Test Current Rating <3.5 mA @ 1000 V ac/dc
Output Voltage 700V
Kit Contents Batteries, Carry Case, Instructions, PD690 Proving Unit, VI-15000 Voltage Indicator
Display Type LED
Battery Type AA
Power Source Battery, Mains
Dimensions 205 x 67 x 27mm
Weight 130g
Height 27mm
Length 205mm
Maximum Operating Temperature +40°C
Minimum Operating Temperature -10°C
Width 67mm
46 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
236,00
(excl. BTW)
285,56
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 236,00
Kalibratie-opties
Related Products
Class:IEC 61010-1, category III / 600 V (C.A ...
Description:
Class:IEC 61010-1, category III / 600 V (C.A 5001);IEC 61010-1, category III / 1000 V (C.A 5005). Range of analogue multimeters for safe measurement of direct or alternating currents.Shockproof case with a "Multistand" multi-purpose fold-away stand for use at worksites ...
The Fluke combinational product consist of a 320 ...
Description:
The Fluke combinational product consist of a 320 series clamp meter and voltage and continuity tester. The clamp meters are designed to perform in the toughest environments and provide noise-free and reliable results and voltage and continuity testers having rugged ...
Mean Well ELG-75 series of constant current 75 ...
Description:
Mean Well ELG-75 series of constant current 75 W LED Driver, which also supports a high-voltage output. Thanks to a fan-less design, the ELG-75 series provides an efficiency rating of up to 91%. Constructed in a robust full metal housing ...
The RS PRO Range of 30watt Constant voltage ...
Description:
The RS PRO Range of 30watt Constant voltage LED Drivers are housed in a compact light weight high quality plastic enclosure with covered input & output terminals suitable for general Indoor LED applications. Input Voltage 100-120VACLow Profile Compact Plastic Low ...