Martindale PD240 Voltage Indicator Proving Unit 2mA 240V dc RS Calibration

  • RS-stocknr. 913-7031
  • Fabrikantnummer PD240
  • Fabrikant Martindale
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: PH
Productomschrijving

Martindale PD240 Pocket Sized Proving Unit

The Martindale PD240 is a pocket-sized, battery-powered 240 V DC proving unit which is limited to a current of 2 mA. This makes it suitable for use with digital multimeters and many two pole voltage testers that have an input impedance greater than 120 kΩ. The PD240 is actuated by microswitch when the probes of a voltage indicator or test leads of a multimeter are inserted into the probe apertures on its front face. An LED adjacent to the probe apertures indicates when the unit is powered. The body of the proving device is made out of flame retardant ABS. It is flush mounted so is stable when used on flat surfaces.

Features and Benefits

Output voltage 240 V + 4% DC at 2 mA, 3.5 mA maximum
LED power indicator threshold180 V + 4% DC output
Minimum operating battery level 5 V DC
Operating temperature range -10 to 40 °C at maximum 70% RH
Dimensions 144 x 63 x 31 mm
Weight 180 g approximately (including battery)

Note

Not for use with Martindale VI13700G voltage indicators or Drummond test lamps

Standards

BS-EN61010-1 2001

Supplied with

Battery, belt clip, instruction manual

Martindale Lock-Off Kits, Voltage Indicators and Proving Units

Specificaties
Kenmerk Waarde
Test Current Rating 2mA
Output Voltage 240V dc
Calibrated RSCAL
Battery Type MN1604, PP3, 6LR6
Power Source Battery
Dimensions 144 x 63 x 31mm
Weight 180g
Height 31mm
Length 144mm
Maximum Operating Temperature +40°C
Minimum Operating Temperature -10°C
Model Number p PD240
Width 63mm
12 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
131,00
(excl. BTW)
158,51
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 131,00
Related Products
RS Pro VP-3 Volt Stick is a pen ...
Description:
RS Pro VP-3 Volt Stick is a pen style non-contact AC voltage indicator. Safely checks the presence of an AC voltage in cables, wall sockets, fuses and junction boxes. No current flow is needed for correct operation. An essential tool ...
The FLIR VP50 is a tough Non-Contact Voltage ...
Description:
The FLIR VP50 is a tough Non-Contact Voltage Detector featuring a combination of alerts – including tactile vibration, red LED alarms, and a powerful LED worklight— so you’ll never miss the presence of voltage even in dark or noisy areas. ...
Optimised for 230V single and 3 phase suppliesAudible ...
Description:
Optimised for 230V single and 3 phase suppliesAudible and visual indication from 200V to 1000V ACExtended probe for easy accessClear tip for high visibility indicationLED torch for use in low lightPower on LED pulse and low battery indicator.
Before carrying out any maintenance or repairs on ...
Description:
Before carrying out any maintenance or repairs on electrical equipment it is essential that all circuitry is isolated and safe to work on. Electricians, engineers, and technicians must be safe in the knowledge that all checks have been made, in ...