Chauvin Arnoux TX 01, LED Voltage tester, 690V ac/dc, Continuity Check, Battery Powered, CAT III 600V

Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Chauvin Arnoux Voltage and Continuity Tester with LEDs - TX0001-Z

Chauvin Arnoux TX0001-Z Voltage and continuity tester allow you to control AC and DC voltages. The Phase tracking system with audible and visual warning of the voltmeter makes your work more efficient and convenient. The self-test function checks the status of the entire tester from battery, test probes, LEDs, the leads and electronics.

Features and Benefits

• Voltage Test: 12 V to 690 V AC/DC (7 LEDs) with buzzer for voltages higher than 50 V • Phase/neutral identification (one-handed!)
• Polarity test: +/- LED
• Audible continuity test (R < 2 kΩ) and diode test
• Resistance Test: 2 kΩ to 300 kΩ (3 LEDs)
• Voltage Protection: 1000 V
• Autotest of 9 V battery and the whole tester assembly, from the test probes to the LEDs, and the lead, the electronics, etc.
• Electrical Safety: IEC 61010 600 V Cat. III
• System for stowing the test probes
• Dimensions: 179 x 47 x 33 mm
• Weight: 170 g

Voltage Level Indicators

A range of voltage testers each available in versions suitable for electronic or electrical applications.

Specificaties
Kenmerk Waarde
Maximum Voltage 690V ac/dc
Continuity Check Yes
Safety Category CAT III 600V
Display Type LED
RCD Trip Test Yes
IP Rating IP50
Battery Type Alkaline, 9 V
Power Source Battery
Dimensions 47 x 36 x 193mm
Weight 170g
Height 193mm
Length 47mm
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Model Number p TX 01
Safety Category Level CAT III
Safety Category Voltage 600V
Width 36mm
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 10-12-2020, met een levertijd van 1 werkdag.
Prijs Each
37,00
(excl. BTW)
44,77
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 37,00
Related Products
A range of voltage testers each available in ...
Description:
A range of voltage testers each available in versions suitable for electronic or electrical applications. Compact proving unit to test two pole volt testers, multimeters and test lamps Generates AC waveform for a true test : Typical output 230V @ ...
All electricians need a two-pole tester. The Fluke ...
Description:
All electricians need a two-pole tester. The Fluke T90, T110, T130 and T150 two-pole voltage and continuity testers are rugged and easy- to- use. The designs offer a choice of functionality and user interface. The different models offer combinations of ...
Tester for automobile electric and electronic circuits. Its ...
Description:
Tester for automobile electric and electronic circuits. Its low power consumption of 1.5mA is suitable for locating faults in electronic components where conventional lamp testers may cause damage. It has a crocodile clip on one end, and a tester with ...
The Fluke 2-pole voltage and continuity tester measure ...
Description:
The Fluke 2-pole voltage and continuity tester measure voltage ranging between 12V and 690VAC/DC. This tester offers the best combination of safety, ease of use and fast answers available anywhere. It comes with probe storage accessory, push-on probe tips, batteries ...