Microchip MCP1501-18E/SN, Fixed Series Voltage Reference 1.8V, ±0.08 % 8-Pin, SOIC

  • RS-stocknr. 111-5570
  • Fabrikantnummer MCP1501-18E/SN
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

MCP1501 Voltage References

The Microchip MCP1501 is a High-Precision Buffered Voltage capable of sinking and sourcing 20mA of current. The device is a low-drift bandgap-based reference that utilises chopper-based amplifiers to reduce drift to zero and provide high current output.

Features

Maximum Temperature Coefficient: 50 ppm/°C from -40°C to +125°C
Initial Accuracy: 0.08%
Operating Temperature Range: -40 to +125°C
Low Typical Operating Current: 140 μA
Line Regulation: 50 ppm/V maximum
Load Regulation: 40 ppm/mA maximum
Output Noise (0.1 Hz to 10 Hz): < 0.1 μVP-P

Voltage References, Microchip

Specificaties
Kenmerk Waarde
Nominal Voltage 1.8V
Package Type SOIC
Reference Type Fixed
Initial Accuracy ±0.08 %
Mounting Type Surface Mount
Topology Series
Maximum Output Current 30mA
Maximum Input Voltage 5.5 V
Minimum Output Voltage 1.79 V
Maximum Output Voltage 1.8 V
Pin Count 8
Line Regulation 50 ppm/V
Load Regulation 40 (Sink) ppm/mA, 70 (Source) ppm/mA
Dimensions 4.9 x 3.9 x 1.5mm
Length 4.9mm
Height 1.5mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Width 3.9mm
130 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 10)
0,701
(excl. BTW)
0,848
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 20
€ 0,701
€ 7,01
30 - 90
€ 0,664
€ 6,64
100 +
€ 0,597
€ 5,97
*prijsindicatie
Verpakkingsopties
Related Products
Linear Technology presents a range of micropower monolithic ...
Description:
Linear Technology presents a range of micropower monolithic step-down buck converters these are intended for applications that need to increase efficiency at light loads. These devices produce low standby quiescent currents when in burst mode. They can be used in ...
The Microchip MCP413x, MCP415x, MCP423x and MCP425x range ...
Description:
The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers that feature a SPI interface. On board is volatile RAM memory.7-bit (129 steps) and 8-bit (257 steps) versions are available in various RAB resistance options from 5 ...
The DG4051E, DG4052E, and DG4053E are high precision ...
Description:
The DG4051E, DG4052E, and DG4053E are high precision CMOS analog multiplexers. The DG4051E is an 8-channel multiplexer, the DG4052E is a dual 4-channel multiplexer, and the DG4053E is a triple 2-channel multiplexer or triple SPDT. The DG4051E, DG4052E, and DG4053E ...
Maxim DS3231M Is a very accurate, low cost ...
Description:
Maxim DS3231M Is a very accurate, low cost real time clock (RTC) This RTC features a battery input so if there is an issue with the mains power the battery will ensure that the time is still kept accurate. The ...