SolaHD 0.75kVA Encapsulated Transformer, 120V ac, 240V ac Primary, 12V ac, 24V ac Secondary

  • RS-stocknr. 890-8810
  • Fabrikantnummer HS20F500B
  • Fabrikant SolaHD
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

SolaHD Hazardous Location Transformers

These heavy-duty encapsulated transformers have been designed for use in hazardous locations (Class 1, Division 2, Group A-D). They are also suited to harsh industrial environments. The encapsulation and rugged NEMA 3R enclosures help to provide protection from dust, moisture and also provide extra shock and vibration resistance. Available in both single and 3 phase options.

Rated for hazardous locations and harsh industrial environments
UL listed
Available in both single and 3 phase options
Single phase: 0.05 kVA to 0.250 kVA
Single Phase: (0.50 → 25 kVA), 3 Phase (3 → 45 kVA)
Conduit knockouts for side entry into roomy wiring compartment
Copper lead wire terminations
0.500 kVA → 10 kVA units are encapsulated with electrical grade silica sand and epoxy for industrial applications

Specificaties
Kenmerk Waarde
Primary Voltage Rating 120V ac, 240V ac
Secondary Voltage Rating 12V ac, 24V ac
Power Rating 0.75kVA
Mounting Type Panel
Maximum Operating Frequency 60Hz
Minimum Operating Frequency 50Hz
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 22-11-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
264,11
(excl. BTW)
319,57
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 264,11
Related Products
The SBE Encapsulated series control transformers have been ...
Description:
The SBE Encapsulated series control transformers have been epoxy encapsulated thus sealing the transformer windings from moisture, dirt and industrial contaminants. They feature extra deep, moulded terminal barriers which helps to reduce the possibility of electrical failure from arcing or ...
The SBE Encapsulated series control transformers have been ...
Description:
The SBE Encapsulated series control transformers have been epoxy encapsulated thus sealing the transformer windings from moisture, dirt and industrial contaminants. They feature extra deep, moulded terminal barriers which helps to reduce the possibility of electrical failure from arcing or ...
Secondary voltages are nominal load voltages on resistive ...
Description:
Secondary voltages are nominal load voltages on resistive loads.Only the pins indicated on the wiring diagram "physically" exist.
MYRRA encapsulated electronic transformers are Switched Mode Power ...
Description:
MYRRA encapsulated electronic transformers are Switched Mode Power Supplies based on Flyback topologyThey are an interesting alternative to the traditional supply in the most common applications of power lower than 5WENERGY SAVING due to high efficiency and low standby powerThe ...