Pulley 54mm Outside Diameter, 10mm Bore

  • RS-stocknr. 352-0692
  • Fabrikantnummer AC10MDP54/1A/D
  • Fabrikant BNL
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

BNL Pulley

Acetal pulleys with stainless steel or carbon steel balls as standard.

Features and Benefits

• Medium duty pulley • Acetal impervious to water
• Pulley 1449418 has Stainless Steel ball bearings
• Excellent performance

Product Application Information

Carbon steel - Can be used in dry applications Stainless steel - Can be used in damp applications with mild detergents

Prefixes

AC - Caged AF - Full complement

Single & Double Row Bearing

Acetal pulleys offer long term wear performance and excellent dimensional stability when subjected to load, temperature and most fluids. Working temperature range: -40°C to +100°C. Balls are either Carbon Steel or Stainless Steel; the latter is more suited to wet applications as it is non-corrosive.

Specificaties
Kenmerk Waarde
Number of Grooves 1
Overall Diameter 54mm
Pulley Width 38mm
Bore 10mm
Material Acetal
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
7,80
(excl. BTW)
9,44
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 7,80
5 - 9
€ 7,55
10 +
€ 7,31
Related Products
5mm pitch x 9mm wide beltManufactured from high ...
Description:
5mm pitch x 9mm wide beltManufactured from high strength materialDesigned to be used with synchronous HTD beltsEasily re-bored to required shaft sizePulley width 14.5mm.
Manufacture of pulleys conforms to ISO 4183Compatible with ...
Description:
Manufacture of pulleys conforms to ISO 4183Compatible with all manufactured HTD® beltsDesigned to be used with appropriate taper.
8mm pitch x 30mm wide beltManufactured from high ...
Description:
8mm pitch x 30mm wide beltManufactured from high strength steelDesigned to be used with synchronous HTD beltsEasily re-bored to required shaft size.
Aluminium timing pulleys to suit all polyurethane timing ...
Description:
Aluminium timing pulleys to suit all polyurethane timing beltsExcept for 48 and 60 tooth, all pulleys have flanges and all have standard pilot bores.