Toko, DEM10050C, 10050 Shielded Wire-wound SMD Inductor with a Ferrite Core, 15 μH ±20% Wire-Wound 6.8A Idc
- RS-stocknr.:
- 106-0491
- Fabrikantnummer:
- 1274AS-H-150M=P3
- Fabrikant:
- Toko
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 106-0491
- Fabrikantnummer:
- 1274AS-H-150M=P3
- Fabrikant:
- Toko
Datasheets
Wetgeving en compliance
- Land van herkomst:
- HN
Productomschrijving
DEM10050C Series Ferrite Inductors
DEM10050C Series ferrite inductors incorporate a magnetic shielded construction, these inductors have a low magnetic flux leakage from the top of coil. These ferrite inductors are 10.3. x10.3. mm square and 5.0 mm Max. height.
DEM10050C Series inductors use flat wire for low DC resistance, and are suitable for large currents. The operating temperature for these ferrite inductors is: -40∼+85°C.
DEM10050C Series inductors use flat wire for low DC resistance, and are suitable for large currents. The operating temperature for these ferrite inductors is: -40∼+85°C.
Murata Non Standard SMT Inductors (Chokes)
Specificaties
Kenmerk | Waarde |
|---|---|
| Inductance | 15 μH |
| Maximum DC Current | 6.8A |
| Package/Case | 10050 |
| Length | 10mm |
| Depth | 10mm |
| Height | 5mm |
| Dimensions | 10 x 10 x 5mm |
| Shielded | Yes |
| Tolerance | ±20% |
| Maximum DC Resistance | 42.3mΩ |
| Series | DEM10050C |
| Core Material | Ferrite |
| Maximum Operating Temperature | +80°C |
| Minimum Operating Temperature | -40°C |
| Inductor Construction | Wire-Wound |
| Moulded | Yes |