TDK ACM Series Type 2520 Wire-wound SMD Inductor with a Ferrite Core, Wire-Wound 150mA Idc

  • RS-stocknr. 108-4662
  • Fabrikantnummer ACM2520-801-3P-T
  • Fabrikant TDK
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

TDK ACM Series SMD Common Mode Chokes

Miniature SMD common-mode wire wound chip filters
Common-mode impedance >1000Ω at 100MHz
Due to low differential mode impedance there is almost no affect upon high speed signals
2-line and 3-line type available
Operating temperature range -25°C to +85°C
Applications include radiation and common-mode noise suppression, USB and IEEE1394 computer lines, LVDS panel link lines

TDK SMD Common Mode Chokes

Specificaties
Kenmerk Waarde
Maximum DC Current 150mA
Package/Case 2520
Length 2.5mm
Depth 2mm
Height 1.2mm
Dimensions 2.5 x 2 x 1.2mm
Maximum DC Resistance 1.6Ω
Series ACM
Core Material Ferrite
Maximum Operating Temperature +85°C
Inductor Construction Wire-Wound
Minimum Operating Temperature -25°C
2000 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (On a Reel of 2000)
0,36
(excl. BTW)
0,44
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
2000 +
€ 0,36
€ 720,00
*prijsindicatie
Related Products
MLF2012 Series Multilayer SMD inductor coils for signal ...
Description:
MLF2012 Series Multilayer SMD inductor coils for signal lines. The MLF2012’s inductors have monolithic construction for reliability, a ferrite core and are magnetically shielded. Additionally by virtue of their excellent heat resistance this series of inductors are equally suitable for ...
DLW5AH/5BS series high performance wirewound chip common mode ...
Description:
DLW5AH/5BS series high performance wirewound chip common mode choke coil. High impedance (max. of 4000ohm at 100MHz: DLW5AH)enables great noise suppressionLarge rated current (max. of 5A) is suitable for power line useDoes not damage high speed signal due to high ...
Subminiature coil inductors with ferrite core for general ...
Description:
Subminiature coil inductors with ferrite core for general use.High quality and low DC resistance.These chips are ideal for increasing the performance of electronic circuits in video, communications, audio equipment and mobile telephones.
Open sizeSaturation currents up to 14 ALow tolerances ...
Description:
Open sizeSaturation currents up to 14 ALow tolerances at high inductance valuesOperating temperature: -40 °C to +125 °CRecommended solder profile: ReflowSwitching regulators with low operating voltages (graphic cards, embedded PC-Cards, mainboards)Integrated DC/DC converterOptimal attenuation in MHz frequency range.