TDK, SPM-LR, 4012 Shielded Wire-wound SMD Inductor with a Metal Core, 1.5 μH ±20% Wire-Wound 3.5A Idc
- RS-stocknr.:
- 123-3143
- Fabrikantnummer:
- SPM4012T-1R5M-LR
- Fabrikant:
- TDK
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 123-3143
- Fabrikantnummer:
- SPM4012T-1R5M-LR
- Fabrikant:
- TDK
Datasheets
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
SPM4012 Series Magnetically Shielded Wire Wound Inductors
SPM4012 Series magnetic shield type wound inductor for power circuits use a metallic magnetic material
SPMSPM4012 series structure has an integrated moulded coil, so hum noise is lower than with core adhesive coils
They have a low-profile with maximum heights of 1.2mm and 3.0mm allowing for different usages
Possible to achieve large current, low Rdc, and compactness
Low inductance variance in high-temperature environments with good DC superimposition characteristics
SPMSPM4012 series structure has an integrated moulded coil, so hum noise is lower than with core adhesive coils
They have a low-profile with maximum heights of 1.2mm and 3.0mm allowing for different usages
Possible to achieve large current, low Rdc, and compactness
Low inductance variance in high-temperature environments with good DC superimposition characteristics
TDK Non Standard SMT Inductors (Chokes)
Specificaties
Kenmerk | Waarde |
---|---|
Inductance | 1.5 μH |
Maximum DC Current | 3.5A |
Package/Case | 4012 |
Length | 4.4mm |
Depth | 4.1mm |
Height | 1.2mm |
Dimensions | 4.4 x 4.1 x 1.2mm |
Shielded | Yes |
Tolerance | ±20% |
Maximum DC Resistance | 65.7mΩ |
Series | SPM-LR |
Core Material | Metal |
Maximum Operating Temperature | +125°C |
Moulded | Yes |
Minimum Operating Temperature | -40°C |
Inductor Construction | Wire-Wound |