TDK, SPM-LR, 5012 Shielded Wire-wound SMD Inductor with a Ferrite Core, 2.2 μH ±20% Wire-Wound 3.2A Idc
- RS-stocknr.:
- 123-3167
- Fabrikantnummer:
- SPM5012T-2R2M-LR
- Fabrikant:
- TDK
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 30-12-2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Elk (in een pakket van 10)
€ 0,993
(excl. BTW)
€ 1,202
(incl. BTW)
| Aantal stuks | Per stuk | Per pak* |
| 10 - 90 | € 0,993 | € 9,93 |
| 100 - 240 | € 0,795 | € 7,95 |
| 250 - 490 | € 0,745 | € 7,45 |
| 500 - 990 | € 0,695 | € 6,95 |
| 1000 + | € 0,645 | € 6,45 |
| *prijsindicatie | ||
- RS-stocknr.:
- 123-3167
- Fabrikantnummer:
- SPM5012T-2R2M-LR
- Fabrikant:
- TDK
Datasheets
Wetgeving en compliance
Productomschrijving
SPM5012 Series Magnetically Shielded Wire Wound Inductors
SPM5012 Series magnetic shield type wound inductor for power circuits use a metallic magnetic material
SPM5012 series structure has an integrated moulded coil, so hum noise is lower than with core adhesive coils
They have a low-profile with maximum heights of 1.2mm and 3.0mm allowing for different usages
Possible to achieve large current, low Rdc, and compactness
Low inductance variance in high-temperature environments with good DC superimposition characteristics
SPM5012 series structure has an integrated moulded coil, so hum noise is lower than with core adhesive coils
They have a low-profile with maximum heights of 1.2mm and 3.0mm allowing for different usages
Possible to achieve large current, low Rdc, and compactness
Low inductance variance in high-temperature environments with good DC superimposition characteristics
TDK Non Standard SMT Inductors (Chokes)
Specificaties
Kenmerk | Waarde |
|---|---|
| Inductance | 2.2 μH |
| Maximum DC Current | 3.2A |
| Package/Case | 5012 |
| Length | 5.4mm |
| Depth | 5.1mm |
| Height | 1.2mm |
| Dimensions | 5.4 x 5.1 x 1.2mm |
| Shielded | Yes |
| Tolerance | ±20% |
| Maximum DC Resistance | 67.7mΩ |
| Series | SPM-LR |
| Core Material | Ferrite |
| Maximum Operating Temperature | +125°C |
| Inductor Construction | Wire-Wound |
| Minimum Operating Temperature | -40°C |
| Moulded | Yes |