Wurth WE-HCC Series Type 1210 Shielded Wire-wound SMD Inductor with a Ferrite Core, 470 nH ±20% Wire-Wound 26A Idc

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

WE-HCC Series Magnetically Shielded Wire Wound Inductors

WE-HCC series SMD magnetically shielded cube inductor for high currents with very high inductance values and high saturation currents.They are used especially with high-performance DC/DC converters and applications include: Graphic cards; Laptops; Industrial computers; Motherboards; High current switching regulators; DC/DC converter; Polyphase-switching regulators; Filter

Wurth Non Standard SMT Inductors (Chokes)

Specificaties
Kenmerk Waarde
Inductance 470 nH
Maximum DC Current 26A
Package/Case 1210 (3225M)
Length 12.1mm
Depth 11.4mm
Height 9.5mm
Dimensions 12.1 x 11.4 x 9.5mm
Shielded Yes
Tolerance ±20%
Maximum DC Resistance 720µΩ
Series WE-HCC
Core Material Ferrite
Maximum Self Resonant Frequency 138MHz
Maximum Operating Temperature +125°C
Minimum Operating Temperature -40°C
Inductor Construction Wire-Wound
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 21-09-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 300)
1,833
(excl. BTW)
2,218
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
300 +
€ 1,833
€ 549,90
*prijsindicatie
Related Products
DLW5AH/5BS series high performance wirewound chip common mode ...
Description:
DLW5AH/5BS series high performance wirewound chip common mode choke coil. High impedance (max. of 4000ohm at 100MHz: DLW5AH)enables great noise suppressionLarge rated current (max. of 5A) is suitable for power line useDoes not damage high speed signal due to high ...
Block type "EMIFIL" BNX series filters incorporating a ...
Description:
Block type "EMIFIL" BNX series filters incorporating a through-type a capacitor, monolithic chip capacitors and bead. The BNX Series high performance filter is for use in DC power circuits. The filter enables obtaining high insertion loss in wide frequency ranges ...
Wurth WE=GF series high-quality wire wound surface mount ...
Description:
Wurth WE=GF series high-quality wire wound surface mount inductors for applications such as HF amplifiers, Oscillators, transponders, LC Filter circuits, adapter networks and also HF Circuits such as tuners. Operating temperature -40°c to +105°c.
B82422T SIMID Series Wire Wound Inductors have a ...
Description:
B82422T SIMID Series Wire Wound Inductors have a ceramic or ferrite coreHigh rated inductance 0.010 to 100μHRated current 60 to 450 mAHigh Q factorHigh resonance frequencyApplications include Filtering of supply voltages, coupling, decoupling, Antenna systems, Automotive electronics, Telecommunications, Consumer ...