Wurth, WE-PD2 Unshielded Wire-wound SMD Inductor with a Ferrite Core, 68 μH ±10% Wire-Wound 1.19A Idc
- RS-stocknr.:
- 333-8667P
- Fabrikantnummer:
- 744776168
- Fabrikant:
- Wurth Elektronik
695 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk (geleverd op een rol) Quantities below 150 on continuous strip
€ 0,92
(excl. BTW)
€ 1,11
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 0,92 |
- RS-stocknr.:
- 333-8667P
- Fabrikantnummer:
- 744776168
- Fabrikant:
- Wurth Elektronik
Datasheets
- SMD - Power Chokes WE-PD2
- EMC Filter for DC/DC Switching Controller Optimised - Application Note
- Influence of Control Loop by an Output Filter - ANP006B Application Note
- Negative Input Resistance of Switching Regulators - Application Note
- Direct Current Losses at the Output Filter of a Switching Controller - ANP009B Application Note
- 8 Design Tips for Power Inductors from Wurth Elektronik - Application Note
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
WE-PD2 Series Wire Wound Chokes
WE-PD2 Series Open frame SMD Power Inductors with a current capability of up to 14 Amps. Recommended for reflow soldering, the WE-PD2 Series inductors are suitable for use in the following applications: Switching regulators with low operating voltage (computer, laptop, mobile phones and pagers); Integrated DC/DC-converter; Perfectly suitable for switching regulators with extremely high efficiency
Wurth Non Standard SMT Inductors (Chokes)
Specificaties
Kenmerk | Waarde |
---|---|
Inductance | 68 μH |
Maximum DC Current | 1.19A |
Length | 10mm |
Depth | 9mm |
Height | 5.4mm |
Dimensions | 10 x 9 x 5.4mm |
Shielded | No |
Tolerance | ±10% |
Maximum DC Resistance | 220mΩ |
Series | WE-PD2 |
Core Material | Ferrite |
Maximum Self Resonant Frequency | 8MHz |
Inductor Construction | Wire-Wound |
Maximum Operating Temperature | +125°C |
Minimum Operating Temperature | -40°C |
- RS-stocknr.:
- 333-8667P
- Fabrikantnummer:
- 744776168
- Fabrikant:
- Wurth Elektronik
- SMD - Power Chokes WE-PD2
- EMC Filter for DC/DC Switching Controller Optimised - Application Note
- Influence of Control Loop by an Output Filter - ANP006B Application Note
- Negative Input Resistance of Switching Regulators - Application Note
- Direct Current Losses at the Output Filter of a Switching Controller - ANP009B Application Note
- 8 Design Tips for Power Inductors from Wurth Elektronik - Application Note