Siemens 9 Way Right Angle Cable Mount Wire Wrap D-sub Connector

  • RS-stocknr. 662-3788
  • Fabrikantnummer 6ES7972-0BA12-0XA0
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: DE
Productomschrijving

Simatic DP, RS-485 right angle adapter

The 6ES7972-0BA12-0XA0 is a right-angle, RS 485 adapter designed to be used to connect PROFIBUS nodes to PROFIBUS bus cables. This module transfers data from 9.6Kb/s up to 12 Mb/s. This PROFIBUS connector can connect up-to 2 PROFIBUS cables and features an integrated resistor combination that can be selected with a slide switch.

Features and Benefits:

  • Up-to 12 Mb/s transmission speed

  • Hard plastic case

  • IP20 rating

  • 0°C to +60°C operating temperatures

  • 90° Cable outlet

Certifications:

  • RoHS Compliant

  • UL Approved

BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Specificaties
Kenmerk Waarde
Number of Contacts 9
Body Orientation Right Angle
Housing Material Polymer
Dimensions 64 x 15.8 x 35.6mm
Mounting Type Cable Mount
Depth 35.6mm
Length 64mm
Width 15.8mm
Maximum Operating Temperature +60°C
Minimum Operating Temperature 0°C
75 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
40,50
(excl. BTW)
49,00
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 40,50
5 - 9
€ 39,52
10 +
€ 39,03
Related Products
Thermoplastic backshell for use with D-subminiature connectors. These ...
Description:
Thermoplastic backshell for use with D-subminiature connectors. These backshells have a clam type shell with a 180° cable exit angle and accept a cable insulation diameter range of 3.00 to 11mm. Each d-subminiature backshell consists of the following components:2 x ...
AMPLIMITE unassembled hinged box and lid unshielded cable ...
Description:
AMPLIMITE unassembled hinged box and lid unshielded cable clamps or backshell kits with a 180 and 90° exit. These AMPLIMITE box and lid unshielded backshells have black thermoplastic housings with a textured finish, black thermoplastic gates, black zinc plated steel ...
EdgeLock wire connectors offer space savings and positive ...
Description:
EdgeLock wire connectors offer space savings and positive locking for secure mating to PCB edge cards. Typically the header is soldered to the PCB, which adds space and assembly steps. Extra steps are involved if rework is required. EdgeLock is ...
From JAE, this DX4 Micro USB receptacle is ...
Description:
From JAE, this DX4 Micro USB receptacle is low profile and 45% smaller than a mini USB. With secure solder mounting to printed circuit boards, this Micro USB receptacle is designed for wire-to-board applications with compatible Micro USB cables. • ...