Lantronix XPCW1001000RP-K 3.3V WiFi Module, ARP, Auto-IP, DHCP, DNS, ICMP, TCP/IP, UDP/IP

  • RS-stocknr. 817-6427
  • Fabrikantnummer XPCW1001000RP-K
  • Fabrikant Lantronix
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

xPico WiFi Raspberry Pi Plate

The Lantronix xPico WiFi Raspberry Pi Plate brings powerful WiFi connectivity to any Raspberry Pi-based project. Based on the xPico WiFi Embedded Device Server Module, the Plate can be set up as a Soft Access Point (AP) and/or as a Client server providing WiFi communication with an AP for a mobile device.

XPCW1001000RP-K xPico WiFi Raspberry Pi Plate
Compatible with the Raspberry Pi 1 Single-Board Computer
XPW100100B-01 xPico WiFi Module
Connector for Raspberry Pi GPIO 26-pin header
MiniUSB Device socket
MiniUSB socket for UART-USB bridge connection
SMA antenna connector
Current monitoring header
Set Default pushbutton
Reset pushbutton
Wake-Up pushbutton
Status LED
AP association LED
Power LED
Power supplied from Raspberry Pi or USB connection

XPW100100B-01 xPico WiFi Module
IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only)
IEEE 802.11 d/h/i/j/k/w/r
WPS 2.0 support
Security: IEEE 802.11i support: WPA-Personal, WPA2-Personal
AES-256 encryption
Soft Access Point with DHCP server and Client Mode
Lantronix SmartRoam™ Technology
QuickConnect: Dynamic Profiles facilitate easy and rapid connections to access points
Complete device server application with full IP Stack and web server
Embedded Network Protocols: TCP/IP, UDP/IP, DHCP, ARP, ICMP, DHCP, Auto-IP, DNS, SNMPv1
ARM Cortex-M3 core processor with 1MB Flash memory, 128KB SRAM
1MB serial SPI Flash memory
Dual UART serial port with data rate of up to 921kbps
SPI bus with 20MHz clock rate
USB 2.0 full rate device mode
u.FL connector for external antenna
Power supply: +3.3Vdc
Low power (6μA Standby)
Dimensions: 24 x 16.5 x 5.64mm
Operating temperature range: -40 to +85°C
Certifications: FCC Class B, UL and EN EMC, Japan
Applications: Local communication for the Internet-of-Things (IoT)

Note

xPico WiFi module available separately under RS Part No. 797-6686

Supplied with

2dBi swivel-type antenna

Specificaties
Kenmerk Waarde
Supported Protocol ARP, Auto-IP, DHCP, DNS, ICMP, TCP/IP, UDP/IP
Supported Security Standards WPA, WPA2
Supported Bus Interfaces A serial CMOS Ports, Lantronix tunneling application, SPI, 300 to 921.6 Kbps
Supply Voltage 3.3V
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
2 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
71,49
(excl. BTW)
86,50
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 71,49
Related Products
The ultra-compact MiniCore RCM67xx is ideal for today’s ...
Description:
The ultra-compact MiniCore RCM67xx is ideal for today’s Smart Energy initiatives as well as other applications that require a cost effective web-enabled device server. The RCM67xx series provides up to 6 serial ports, configurable I/O and control features such as ...
Weidmueller “u-remote”, innovative remote I/O concept with small ...
Description:
Weidmueller “u-remote”, innovative remote I/O concept with small dimensions and IP20 which focuses purely on user benefits: tailored planning, faster installation, safer start-up, no more downtime. For considerably improved performance and greater productivity.U-remote technology offers tool-free ...
The QFM-TRX1-24G is a radio telemetry transceiver module ...
Description:
The QFM-TRX1-24G is a radio telemetry transceiver module operating in the 2.4GHz ISM frequency band. It is based on the Texas Instruments CC2500 transceiver device. RF Carrier Frequency: 2400MHz to 2483MHz ISM BandRF Output Power: up to +1dBmReceiver Sensitivity: -104dBm ...
6LoWPAN (IPv6 over Low-Power Wireless Personal Area Networks) ...
Description:
6LoWPAN (IPv6 over Low-Power Wireless Personal Area Networks) refers to a communication protocol for transmission of IPv6 packets over energy-saving wireless networks. As a basis for radio communication here thestandard IEEE 802.15.4 (PHY and MAC) is served like it is ...