RS PRO Bronze 20 Teeth Worm Wheel Gear, 16.11mm PitchDiam. , 12mm Hub Diam. , 18mm Face Width

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Metric Worm Gears & Pinion Gears - Steel & Bronze

Worm gears and pinion gears designed to produce large speed reduction ratios, especially in low loading applications. Available in modules 0.8 and 1.0. Both the pinion gear and worm gear module number / number of starts must match to ensure correct assembly.

Features and Benefits

Worm gear manufactured from steel (pinion gears from phosphor bronze each sold separately) Worm gears are secured onto a shaft using a M4 grub screw (supplied)
H7 pilot bore tolerance
Right-hand gear direction

Note

Worm gears and pinions should be ordered separately.

Specificaties
Kenmerk Waarde
Module 0.8
Material Bronze
Number of Teeth 20
Pitch Diameter 16.11mm
Hub Diameter 12mm
Face Width 18mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 06-11-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
16,71
(excl. BTW)
20,22
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 16,71
5 - 9
€ 16,21
10 +
€ 15,68
Related Products
A range of RS Pro flexible metric racks ...
Description:
A range of RS Pro flexible metric racks made from Duracon, aluminium fixing rails and clamping plates and screws (Sold Separately). These racks can be mounted directly onto the application surface or by using the aluminium fixing rails. • Racks ...
Metric gear racks with a pressure angle of ...
Description:
Metric gear racks with a pressure angle of 20°. Gear racks can be supplied in lengths of 300, 500 and 1000mm and with various pitch from 0.5 module to 2 module. Available in steel or nylon to a dimensional tolerance ...
A range of steel mitre gears providing a ...
Description:
A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finishTensile strength (min) 569 N/mm²45° pitch angle, 48° face angle.
A range of steel bevel gears. Made from ...
Description:
A range of steel bevel gears. Made from S45C induction hardened steel with a chemi-black finishTensile strength (min) 569 N/mm²20° pressure angle.