RS PRO Bronze 30 Teeth Worm Wheel Gear, 24.16mm PitchDiam. , 18mm Hub Diam. , 18mm Face Width

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Metric Worm Gears & Pinion Gears - Steel & Bronze

Worm gears and pinion gears designed to produce large speed reduction ratios, especially in low loading applications. Available in modules 0.8 and 1.0. Both the pinion gear and worm gear module number / number of starts must match to ensure correct assembly.

Features and Benefits

Worm gear manufactured from steel (pinion gears from phosphor bronze each sold separately) Worm gears are secured onto a shaft using a M4 grub screw (supplied)
H7 pilot bore tolerance
Right-hand gear direction

Note

Worm gears and pinions should be ordered separately.

Specificaties
Kenmerk Waarde
Module 0.8
Material Bronze
Number of Teeth 30
Pitch Diameter 24.16mm
Hub Diameter 18mm
Face Width 18mm
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
24,09
(excl. BTW)
29,15
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 24,09
5 - 9
€ 23,61
10 +
€ 23,13
Related Products
A range of steel mitre gears providing a ...
Description:
A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finishTensile strength (min) 569 N/mm²45° pitch angle, 48° face angle.
The RS PRO 14 teeth metric steel spur ...
Description:
The RS PRO 14 teeth metric steel spur gear has a pitch diameter of 21mm, hub diameter of 17mm and bore diameter of 8mm. The gear has a face width of 17mm. It has a module value of 1.5. • ...
The RS PRO 16 teeth metric spur gear ...
Description:
The RS PRO 16 teeth metric spur gear has a pitch diameter of 16mm, hub diameter of 9mm and bore diameter of 4mm. The gear has a face width of 9mm. It has a module value of 0.7. • Standard ...
RS Pro high quality steel spur gears in ...
Description:
RS Pro high quality steel spur gears in a range of gear ratios. Ideally used for speed reduction or increase, torque multiplication, resolution and accuracy in positioning systems. • Steel EN8 (080M40/080M46) or equivalent• Tensile strength: 569N/mm2 (min.)• 20° pressure ...