RS PRO Bronze 40 Teeth Worm Wheel Gear, 40mm PitchDiam. , 26mm Hub Diam. , 16.5mm Face Width

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Metric Worm Gears & Pinion Gears - Steel & Bronze

Worm gears and pinion gears designed to produce large speed reduction ratios, especially in low loading applications. Available in modules 0.8 and 1.0. Both the pinion gear and worm gear module number / number of starts must match to ensure correct assembly.

Features and Benefits

Worm gear manufactured from steel (pinion gears from phosphor bronze each sold separately) Worm gears are secured onto a shaft using a M4 grub screw (supplied)
H7 pilot bore tolerance
Right-hand gear direction

Note

Worm gears and pinions should be ordered separately.

Specificaties
Kenmerk Waarde
Module 1
Material Bronze
Number of Teeth 40
Pitch Diameter 40mm
Hub Diameter 26mm
Face Width 16.5mm
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
39,64
(excl. BTW)
47,96
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 39,64
5 - 9
€ 38,85
10 +
€ 38,06
Related Products
A range of steel mitre gears providing a ...
Description:
A range of steel mitre gears providing a 1:1 gear ratio. Made from S45C induction hardened steel with a chemi-black finishTensile strength (min) 569 N/mm²45° pitch angle, 48° face angle.
RS Pro high quality steel spur gears in ...
Description:
RS Pro high quality steel spur gears in a range of gear ratios. Ideally used for speed reduction or increase, torque multiplication, resolution and accuracy in positioning systems. • Steel EN8 (080M40/080M46) or equivalent• Tensile strength: 569N/mm2 (min.)• 20° pressure ...
Injection moulded acetal copolymer spur gears providing a ...
Description:
Injection moulded acetal copolymer spur gears providing a wide range of gear ratios. Tensile strength 94N/mm2Hardness (Rockwell R) 110-12020° Pressure angle.
Steel EN8 (080M40/080M46) or equivalent20° pressure angleDIN Standard ...
Description:
Steel EN8 (080M40/080M46) or equivalent20° pressure angleDIN Standard - DIN 867, DIN 3962, DIN 3963, Grade / Quality 9 or equivalentStandard tolerance, unless otherwise stated ±0.25mm.