TE Connectivity Single Port Straight SFP+ Cage, Press Fit Termination

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

TE Connectivity SFP+ Cage Assemblies

A range of SFP+ Cage Assemblies from TE Connectivity:
820-8136 single port SFP Cage that requires a connector and has 3.5 mm long solder tails
820-8316 single port SFP+ Cage Assembly with EMI springs for PCI card applications with 1 degree angle plus Heat Sink and Clip, solder tails
820-8189 single port SFP+ Cage Assembly with EMI springs, PCI pin Heat Sink and Clip, press-fit tails
820-8173 2x2 port SFP+ Cage and Connector Assembly with 4 Light Pipes, EMI springs and press-fit tails
909-8065 single port SFP+ Cage Assembly with EMI springs,SAN Heat Sink and press-fit tails
909-8069 single port SFP+ Cage Assembly with EMI springs, Network Heat Sink and press-fit tails

QSFP+ Connectors and Cable Assemblies - TE Connectivity

The Quad Small Form-factor Pluggable (QSFP) interconnect system from TE Connectivity is a four-channel package, offering 3 times the density of traditional SFP ports and supports speeds up to 10Gb/s per channel (suitable for 8G Fiber Channel and 10G Ethernet). The system is ideal for switches, routers, and host bus adapters (HBA's) where bandwidth is essential.

Specificaties
Kenmerk Waarde
Type SFP
Gender Female
Number of Ports 1
Body Orientation Straight
Cage Dimensions 14.5 x 48.7 x 22.8mm
Termination Method Press Fit
Cage Height 22.8mm
Cage Length 14.5mm
Cage Width 48.7mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 25-02-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Box of 40)
12,246
(excl. BTW)
14,818
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
40 +
€ 12,246
€ 489,84
*prijsindicatie
Related Products
Unsealed MCP 2.8mm tab housings made from PA ...
Description:
Unsealed MCP 2.8mm tab housings made from PA 66 GF13. These MCP 2.8mm tab housings accept a wire size of 2.5 mm2 FLR max and have various keying options (see table). For suitable mating MCP 2.8 receptacle housings see stock ...
REDCUBE SMT bush Power Elements that combine the ...
Description:
REDCUBE SMT bush Power Elements that combine the advantages of SMT technology, compact size, and high current technology. These SMT power elements can be quickly assembled off the reel onto a PCB using automatic placement machines and reflow soldered which ...
SFP dust caps made from black theroplastic for ...
Description:
SFP dust caps made from black theroplastic for use with SFP cage assemblies.
ChipCoolers XFP pin fin heatsink for use with ...
Description:
ChipCoolers XFP pin fin heatsink for use with XFP, MSA SAN. This XFP pin fin heatsink is made from aluminium with a nickel finish and is 6.5mm in height. For clip see stock number717-4357.