TE Connectivity 20 Way Female SFP+ Connector

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

TE Connectivity SFP (Small Form Factor Pluggable) SMT Connectors

SFP (Small Form Factor Pluggable) SMT PT (pluggable transceiver) connectors for use with SFP cages to form part of high-speed pluggable I/O interface. The SFP system is designed for increased functionality and to meet increasing bandwidth demands. SFP connectors support applications up to 4 Gbit/s and SFP+ connectors support applications up to 16 Gbit/s. These SFP PT connectors have a reliable 20 position interface with improved signal integrity with contact spacing on a 0.8 mm centreline. Each of these SFP connectors consists of a housing with right angle SMT contacts. The housings incorporate a card entry slot that accepts a 1.0 ±0.1 mm thick integrated circuit card. Alignment posts provide connector stability on the PCB and board standoffs allow easy PCB cleaning after soldering. Part number 1367073-1 is an SFP connector with 0.38 μm gold plated contacts
Part number 1367073-2 is an SFP connector with 0.76  μm gold plated contacts
Part number 1888247-1 is an SFP+ compliant connector with 0.76  μm gold plated contacts
Part number 1888247-2 is an SFP+ compliant connector with 0.38  μm gold plated contacts

Features and Benefits

• SFP High-speed pluggable I/O interface
• Supports data rates of up to 4 Gbit/s (SFP) and up to 16 Gbit/s (SFP+)
• Reliable 20 position interface for increased signal integrity
• Card entry slot for 1.0 ±0.1 mm IC card
• Alignment posts for PCB stability
• Board standoffs for easy PCB cleaning

Product Application Information

These SFP high-speed pluggable I/O connectors are for use in applications that require a high-speed data rate. Applications include switches, routers, servers, hubs, storage, controllers and Network Interface Cards

SPF Cage

Specificaties
Kenmerk Waarde
Type SFP+
Gender Female
Number of Ports 1
Number of Contacts 20
Contact Material Phosphor Bronze
Contact Plating Gold over Nickel
Housing Material Liquid Crystal Polymer
Termination Method Solder
480 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (On a Tape of 480)
1,112
(excl. BTW)
1,346
(incl. BTW)
Aantal stuks
Per stuk
Per tape*
480 +
€ 1,112
€ 533,76
*prijsindicatie
Related Products
ChipCoolers XFP pin fin heatsink for use with ...
Description:
ChipCoolers XFP pin fin heatsink for use with XFP, MSA SAN. This XFP pin fin heatsink is made from aluminium with a nickel finish and is 6.5mm in height. For clip see stock number717-4357.
A series of zQSFP+ stacked receptacle cage assemblies ...
Description:
A series of zQSFP+ stacked receptacle cage assemblies with integrated connectors supplied by TE Connectivity. The z Quad small form –factor pluggable plus range of products are designed for applications in the networking,telecommunication and data centre industries. The next generation ...
SFP single port pluggable hot swappable Cages with ...
Description:
SFP single port pluggable hot swappable Cages with a full metal shield for EMI reduction and grounding. These SFP single port pluggable cages have various termination options and are available in a single piece or 2 prices (stock number 680-9709 ...
74737 series SFP single port cages for use ...
Description:
74737 series SFP single port cages for use with 74441 SFP, SFP+ pluggable receptacle connectors. These 74737 series SFP cages have EMI shielding and spring fingers for EMI panel, bezel mounting.Stock number 896-7478 has 3.05mm press-fit tails and through hole ...