- RS-stocknr.:
- 831-933
- Fabrikant:
- RS PRO
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Alternatieven
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor mogelijke alternatieven.
- RS-stocknr.:
- 831-933
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- GB
Productomschrijving
RS PRO Stainless Steel Pre-Cut Shim, 75 mm x 75 mm x 0.25 mm
When you need a spacer tool to fill openings or gaps between surfaces, choose these RS PRO stainless steel pre-cut shims. They're supplied in packs of ten shims with the same thickness, so you'll have plenty on hand for your equipment.
For strength and durability, the shims are made from a robust, corrosion-resistant stainless steel material. Each shim is clearly labelled with its thickness, making it easy to identify the shim size you need for your applications.
These shims are commonly used to support, adjust and accurately align elements of machinery and equipment. Use them to adjust for uneven surfaces and soft feet irregularities, as well as to raise or lower machinery for the purpose of accurate shaft alignment.
For strength and durability, the shims are made from a robust, corrosion-resistant stainless steel material. Each shim is clearly labelled with its thickness, making it easy to identify the shim size you need for your applications.
These shims are commonly used to support, adjust and accurately align elements of machinery and equipment. Use them to adjust for uneven surfaces and soft feet irregularities, as well as to raise or lower machinery for the purpose of accurate shaft alignment.
Features and Benefits
- Length of 75 mm
- Stainless steel material
- Slot width of 21 mm
- Thickness of 0.25 mm
- Width of 75 mm
Specificaties
Kenmerk | Waarde |
---|---|
Material | Stainless Steel |
Thickness | 0.25mm |
Length | 75mm |
Width | 75mm |
Slot Width | 21mm |