Press Fit Fitting Elbow
- RS-stocknr.:
- 181-6321
- Fabrikantnummer:
- 38300
- Fabrikant:
- Pegler Yorkshire
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 181-6321
- Fabrikantnummer:
- 38300
- Fabrikant:
- Pegler Yorkshire
Datasheets
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- FR
Productomschrijving
Pegler Yorkshire Press Elbow
The Pegler Yorkshire 28mm 90° copper S12 elbow is used with hard and half-hard copper tubes. It has a press-fit connection type.
Features and Benefits
• Ambient temperature ranges between 15°C and 95°C
• Clean, rapid and heat-free jointing. No complicated clamping techniques, long preparation procedures or waiting for adhesive to dry
• Electrical continuity assured when jointing process is complete
• Leak before press feature
• Major savings in installation time and cost as compared to traditional jointing methods
• No carbon deposits, internal solder runs or flux residue. Reduced risk of corrosion
• No hot works required
• Operating pressure is 16bar
• Perfectly clean internal bore-less finishing or cleaning required
• Reduced flushing requirement
• Safe as no naked flames
• System does not need to be dry for effective jointing
• Clean, rapid and heat-free jointing. No complicated clamping techniques, long preparation procedures or waiting for adhesive to dry
• Electrical continuity assured when jointing process is complete
• Leak before press feature
• Major savings in installation time and cost as compared to traditional jointing methods
• No carbon deposits, internal solder runs or flux residue. Reduced risk of corrosion
• No hot works required
• Operating pressure is 16bar
• Perfectly clean internal bore-less finishing or cleaning required
• Reduced flushing requirement
• Safe as no naked flames
• System does not need to be dry for effective jointing
Applications
• Domestic maintenance, refurbishment and new build
• Large-scale public sector projects
• Large-scale public sector projects
Certifications
• BS 8537:2010
• EN 1787
• WRAS approval
• DVGW approval
• EN 1787
• WRAS approval
• DVGW approval
Specificaties
Kenmerk | Waarde |
|---|---|
| Fitting Type | Elbow |