Schneider Electric Dual-Channel Emergency Stop, Safety Mat/Edge, Safety Switch/Interlock Safety Relay, 115V ac, 2

RS-stocknr.:: 464-502
Fabrikantnummer:: XPSATE3410P
Fabrikant:: Schneider Electric

Datasheets (7)

Schneider Electric Dual-Channel Emergency Stop, Safety Mat/Edge, Safety Switch/Interlock Safety Relay, 115V ac, 2

Bekijk deze categorie

Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service

Alternatief

Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.

Schneider Electric XPSU Emergency Stop Safety Relay, 48 → 240V ac/dc, 3-Channel, 7 Safety Contacts

RS-stocknr.: 200-6136

Prijs Per stuk

€ 355,10

(excl. BTW)

€ 429,67

(incl. BTW)

RS-stocknr.:: 464-502
Fabrikantnummer:: XPSATE3410P
Fabrikant:: Schneider Electric

Land van herkomst:: ID

Schneider Electric Safety Relays - XPS-ATE Range

The Schneider Electric XPS-ATE range of safety modules have been created and designed to be used for monitoring emergency stop circuits. They provide protection for both machines and operators through immediately stopping the dangerous movement on receipt of a stop instruction or if a fault is detected within the circuit.

Features & Benefits

Conforming to standards EN/ISO 13850 and EN/IEC 60204-1 and also meet the safety requirements for the electrical monitoring of switches in protection devices conforming to standard EN 1088/ISO 14119

Has a stop category 0, instantaneous opening safety outputs (2 for the XPS-ATE range)

Incorporates stop category 1-time delay outputs (3 for XPS-ATE) which allows for controlled deceleration of your motor or device

The time delay of the 3 output circuits is adjustable between 0 and 30 seconds through the use of a 12-position selector switch

Incorporates 4 solid-state signalling outputs for signalling to the process PLC

In the aid of diagnostics, each module from the XPS-ATE range feature LEDs which provide information on the monitoring of circuit status

Configurable start button monitoring function, depending on the wiring

XPSATE3410P Features and Benefits.

XPSATE Series

For emergency stop and switch monitoring applications.

Emergency stop button with 2 NC contacts.

Configurable.

Captive screw clamp terminals.

Output Relay instantaneous opening, 2 NO circuit(s), volt-free, Relay time delay opening, 3 NO circuit(s), volt-free.

3 solid state additional outputs.

115 V ac Rated supply voltage.

Frequency 50/60 Hz.

Maximum power consumption 8W.

Internal, electronic input protection.

Breaking capacity 180 VA holding AC-15 C300 relay output. 1800 VA inrush AC-15 C300 relay output.

Minimum output current 10 mA for relay output.

Minimum output voltage 17 V for relay output.

4 LEDs.

35 mm symmetrical DIN rail mounting.

Weight 0.38 kg.

IP20 (terminals) conforming to EN/IEC 60529.

IP40 (enclosure) conforming to EN/IEC 60529.

Safety Level.

Can reach PL d/category 3 time delay safety outputs conforming to EN/ISO 13849-1. Can reach PL e/category 4 instantaneous safety outputs conforming to EN/ISO 13849-1. Can reach SILCL 3 instantaneous safety outputs conforming to EN/IEC 62061. Can reach SILCL 2 time delay safety outputs conforming to EN/IEC 62061.

Standards.

EN/IEC 60204-1, EN/IEC 60947-5-1, EN/ISO 13850.

Certificates.

CSA, TÜV, UL.

Kenmerk	Waarde
Supply Voltage	115V ac
Number of Channels	2
Safety Contacts	2
Function	Emergency Stop, Safety Mat/Edge, Safety Switch/Interlock
Auxiliary Contacts	4
Reset Method	Automatic & Manual
Range	Preventa
Safety Category ISO 13849-1	3
Terminal Type	Screw
Configurable	Yes
Depth	114mm
Series	XPS ATE
Width	45mm
Length	99mm