Epoxy Resins & Epoxy Adhesives

Epoxy resins and adhesives are characterised by their excellent electrical properties and chemical resistance, strength and low absorption of moisture. They make great adhesives and also one of the few types of glue that can be used on metals and glass. Epoxy can be used as a protective coating as well as materials in circuit boards and for patching holes in concrete pavements. These versatile resins offer high strength resistance to corrosion. The high strength to weight ratio and dimensional stability as well as adhesion properties make them ideal for a wide range of applications. Different resins are produced by varying the ratios of the chemical components.



Resins are relatively high in viscosity (measure of its resistance to flow), so that they are moulded at temperatures around 50 to 100°C, or dissolved in an inert solvent (solvent that does not react with anything in solution) to reduce viscosity to a point at which lamination at room temperature becomes possible.



How are they made?


Most epoxy resins are an industrial product derived from petroleum and are themselves the result of a chemical reaction called curing. This involves epoxies and other chemicals more commonly known as hardeners or curing agents. Depending on the type of reaction used to produce them, they can be either low-molecular honey-like liquids or high-molecular, solid substances. Their molecular weight often determines their potential uses and applications.



Did you know?


Currently. there are more than 50 different substances known as epoxy resins. Also, there are hundreds of hardeners to modify epoxy polymer properties to meet the most varied requirements.



Epoxy uses


  • General purpose adhesives

  • As the binder in cement and mortars

  • Rigid foams

  • Non-skid coatings

  • Solidifying sandy surfaces in oil drilling

  • Industrial coatings

  • Potting and encapsulating media

  • Fibre reinforced plastics


Advantages of Epoxy


  • Low shrink during cure

  • Excellent moisture and chemical resistance

  • Good electrical properties

  • Increased mechanical and fatigue strength

  • Impact resistant

  • No VOCs (Volatile Organic Compounds)

  • Long shelf life

  • ...
Lees meer Lees minder

Filters

1 - 20 van 65 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Material Compatibility Colour Package Type Package Size Setting Time Minimum Operating Temperature Maximum Operating Temperature Trade Name Cure Time Flame Retardant Shear Strength Filler Material Chemical Composition Odour
RS-stocknr. 132-605
FabrikantRS PRO
€ 8,27
Each
Aantal stuks
Ceramic, Glass, Metal, Plastic, Stone, Wood Transparent Dual Cartridge 24 ml - - - - - No - - Epoxy Resin Mercaptan
RS-stocknr. 388-8954
Fabrikantnummer140295100
FabrikantAraldite
€ 21,85
Each
Aantal stuks
Ferrous Metal, Non Ferrous Metal, Rubber, Wood Yellow Dual Cartridge 50 ml - +40°C +80°C Araldite 2012 120 min Yes 19 N/mm² - - -
RS-stocknr. 458-9478
Fabrikantnummer248211
FabrikantLoctite
€ 20,32
Each
Aantal stuks
Ceramic, Metal, Plastic, Wood Transparent Amber Dual Cartridge 50 ml 30 → 150min -55°C +120°C HYSOL 3421 240 min - - - - -
RS-stocknr. 236-7995
Fabrikantnummer14270
FabrikantITW Devcon
€ 18,35
Each
Aantal stuks
Ceramic, Concrete, Fabric, Glass, Metal, Wood Transparent Cartridge 50 ml 3 → 6min -40°C +93°C 5 Minute Epoxy 10 → 15 min - 13 MPa - - -
RS-stocknr. 314-9704
Fabrikantnummer144805200
FabrikantAraldite
€ 39,30
Each
Aantal stuks
Polyamide Yellow Dual Cartridge 300 g 2h -50°C +65°C Araldite 2011 - - 19 N/mm² - - -
RS-stocknr. 458-9585
Fabrikantnummer254061
FabrikantLoctite
€ 20,16
Each
Aantal stuks
Metal Grey Dual Cartridge 50 ml 45min -55°C +120°C Hysol 3423 180 min - 17 N/mm² - - -
RS-stocknr. 458-9563
Fabrikantnummer451231
FabrikantLoctite
€ 19,86
Each
Aantal stuks
Metal, Plastic Grey Dual Cartridge 50 ml 40min -55°C +120°C Hysol 9461 240 min - - - - -
RS-stocknr. 332-1754
Fabrikantnummer140311600
FabrikantAraldite
€ 68,23
Each
Aantal stuks
Ceramic, Metal, Plastic, Rubber Transparent Dual Cartridge 500 g - +40°C +80°C Araldite 2020 - - 17 N/mm² - - -
RS-stocknr. 458-7292
FabrikantnummerDP760
Fabrikant3M
€ 37,75
Each
Aantal stuks
Ceramic, Metal, Stone White Dual Cartridge 50 ml 45 → 60min -55°C +230°C Scotch-Weld DP760 - - 20 → 29 MPa Epoxy - -
RS-stocknr. 514-701
Fabrikantnummer1303596
FabrikantDouble Bubble
€ 81,97
1 Box of 50
Box(es)
Ceramic, Concrete, Metal, Plastic, Wood Yellow Sachet 150 g 3 → 5min -55°C +100°C Double Bubble - - 9 MPa - - -
RS-stocknr. 388-8948
Fabrikantnummer140289600
FabrikantAraldite
€ 63,13
Each
Aantal stuks
Polyamide Yellow Dual Cartridge 200 ml - +45°C +80°C Araldite 2011 36 h - 19 N/mm² - - -
RS-stocknr. 691-173
FabrikantRS PRO
€ 75,50
Each
Aantal stuks
Metal, Steel Grey Tub 500 g - - +93°C - 16 h - 14 N/mm² Steel - -
RS-stocknr. 388-9058
Fabrikantnummer139689000
FabrikantAraldite
€ 54,60
Each
Aantal stuks
Ferrous Metal, Glass Fibre Reinforced Polymer, Non Ferrous Metal Beige Dual Cartridge 200 ml - +65°C +100°C Araldite 2015 21 h - 17 N/mm² - - -
RS-stocknr. 236-8011
Fabrikantnummer14260
FabrikantITW Devcon
€ 17,98
Each
Aantal stuks
Ceramic, Concrete, Ferrite, Ferrous Metal, Glass, Non Ferrous Metal, Wood Transparent Cartridge 50 ml 30 → 35min -40°C +93°C 2 Ton 16 h - 15.5 MPa - - -
RS-stocknr. 850-962
FabrikantRS PRO
€ 7,60
Each
Aantal stuks
Metal Black Syringe 25 ml 5min - - - 24 h Yes - Inorganic Barium Sulphate, Bisphenol A-(Epichlorhydrin), Limestone, Magnesium Carbonate, Talc -
RS-stocknr. 567-581
FabrikantRS PRO
€ 16,87
Each
Aantal stuks
- Red Syringe 10 ml - - +140°C - 20 (120°C) min, 40 (100°C) min, 60 (90°C) min - - - Aliphatic Amines, Epoxy Resin, Neopentyl Glycol Diglycidyl Ether -
RS-stocknr. 553-614
FabrikantRS PRO
€ 42,28
1 Box of 50
Box(es)
Ceramic, Concrete, Metal, Plastic, Wood Transparent Sachet 150 g 3 → 5min -55°C +100°C - 24 h Yes - - 2, 4, 6-Tris(Dimethylaminomethyl)Phenol Characteristic
RS-stocknr. 691-230
FabrikantRS PRO
€ 52,00
Each
Aantal stuks
Concrete, Metal, Plastic Grey Tub 500 g 45min - +121°C - 16 h - - Metal - -
RS-stocknr. 850-934
FabrikantRS PRO
€ 11,80
Each
Aantal stuks
Aluminium, Steel Yellow Cartridge 40 ml 3 → 4min - - - 2 h Yes - - Bisphenol A-(Epichlorhydrin), Bisphenol F Slight
RS-stocknr. 691-195
FabrikantRS PRO
€ 78,89
Each
Aantal stuks
Metal - Tub 500 g 60min - +121°C - 16 h - 18 MPa Aluminium - -
Related Products
A 2-part, fast setting (4-5 minutes), toughened acrylic ...
Description:
A 2-part, fast setting (4-5 minutes), toughened acrylic adhesive for high strength structural bonding applications. The adhesive Bonds well to Aluminium, metal, wood etc and provides a tough flexible bond line. Supplied in 50ml twin cartridge, it requires applicator gun, ...
3M™ Scotch-Weld™ Low Odour Acrylic Adhesives are high ...
Description:
3M™ Scotch-Weld™ Low Odour Acrylic Adhesives are high performance, two-part acrylic adhesives with lower odour. ToughenedLow odourWork life of approximately 10 minutesGood shear strengthStructural strength in about 18 minutesHigh peel and impact strength10:1 mix ratioIncreased cure speed with applied heatFor ...
The Henkel 50g tube contact adhesive is a ...
Description:
The Henkel 50g tube contact adhesive is a polychloroprene and synthetic resin-based bonding liquid for glueing wood, laminate metal, rigid PVC, rubber, ceramic, glass, porcelain, leather, etc. It is also used for weather stripping to doors and windows. It can ...
Versatile durable two-part epoxy compounds for maintenance and ...
Description:
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals. Ceramic filled, epoxy that provides a smooth, ...