The primary function of a distribution block is to supply power more efficiently to a series of devices. The secondary function is to isolate short circuit incidents to prevent the complete shutdown from occurring. Distribution blocks can handle a range of frequencies and currents. Using distribution blocks requires only one large wire on the input side to link each connected device back to the power source. This eliminates the need for separate wiring of each device.
What are distribution blocks used for?
Distribution blocks are used in various industries:
Heating/cooling for operating heaters, cooling systems and ventilation equipment.
Power distribution control in the form of voltage transformers, uninterrupted power supply units and distribution cabinets
Solar, wind and turbine as the power supply to distribute energy.
Electrical vehicles for charging stations.
Electronic automation, including elevators, lifting equipment and conveyor systems.
Types of distribution blocks
The two main types of distribution block are:
• Bussed (enclosed) blocks, which allow for a larger input cable to be split out into smaller cables for branch circuits.
• Independent blocks, which enable multiple individual circuits to be routed to a single location as they are not connected to each other.
Description:
Distribution block, Basic terminal block with supply, The
blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 450 V, nominal current: 24 A, connection method: Push-in connection, Push-in connection, number ...
Description:
The Phoenix 450V distribution block has flexible use
and clear wiring. It is basic terminal block with supply that can be bridged with one another via the conductor shaft with corresponding plug-in bridges. Degree of pollution 3Overvoltage category IIITime savingSpace ...
Description:
The Phoenix Contact PTFIX series distribution block with
push in connection offer a flexible distribution solution and it used DIN rail adapter mounting type. It can be used straight away and expanded as needed. It has 12 way of connection ...
Description:
The Phoenix Contact PTFIX series distribution block with
push in connection offer a flexible distribution solution and it used adhesive mounting type. It can be used straight away and expanded as needed. It has 19 way of connection and its ...