Internal Door Latches

Internal door latches are used to hold doors and access panels in place. They hold a door closed, but can also be used to secure a cabinet, stop a cover flying open, compress a gasket or provide a place for a padlock. A range of types are available in different finishes. Roller Bolts provide a cheap and simple solution for keeping full-size internal doors closed. When the door is closed, the roller bolt hits the strike plate on the frame and compresses and sits in the indented part of the keep. It holds itself under the tension of its spring, keeping the door closed. Rack bolts, also known as mortise security bolts, are fitted in a cylindrical mortise that has been drilled into the door. The bolt is operated using a key from inside the door, only the keyhole is visible, not the bolt. Lever bolts are mortised into the door to create a flush surface either on the front of the door or in between two doors. They are often used on French doors and double doors in commercial and domestic applications. A pawl latch is a quarter turn latch that uses a rotating cam (pawl) to engage and disengage a keeper or a door frame, while applying compression between the door and its frame. Typical uses for these latches are for electronic enclosures, HVAC enclosures, buses, trucks/trailers, RVs, boats and other applications where the latch is mounted on a thin sheet of metal.

...
Lees meer Lees minder

Filters

1 - 12 van 12 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Latch Type Material Finish
RS-stocknr. 301-0072
Fabrikantnummer7600 C45
FabrikantVachette
€ 57,86
Each
Aantal stuks
Forend and Strike Steel Chrome Plated
RS-stocknr. 347-8692
Fabrikantnummer4463012
€ 8,76
Each
Aantal stuks
- - Chrome Plated
RS-stocknr. 281-8421
Fabrikantnummer2182
FabrikantPenn Fabrication
€ 10,80
Each
Aantal stuks
- Steel Zinc Plated
RS-stocknr. 247-3927
FabrikantnummerB1511SS
FabrikantLegge
€ 14,52
Each
Aantal stuks
Roller Bolt Brass -
RS-stocknr. 278-433
FabrikantnummerXR-100-1-278-433
€ 11,27
Each
Aantal stuks
Pawl Latch Steel Zinc Plated
RS-stocknr. 306-2455
Fabrikantnummer2240
FabrikantPenn Fabrication
€ 6,99
1 Bag of 2
Bag(s)
Toggle Steel Nickel Plated
RS-stocknr. 278-427
FabrikantnummerXR-100-1-278-427
€ 11,53
Each
Aantal stuks
Pawl Latch Steel Zinc Plated
RS-stocknr. 636-4108
FabrikantnummerB3721NP
FabrikantLegge
€ 5,82
Each
Aantal stuks
Forend and Strike Steel Nickel Plated
RS-stocknr. 247-3933
FabrikantnummerB464SS
FabrikantLegge
€ 12,76
Each
Aantal stuks
Rack Bolt Steel Zinc Plated
RS-stocknr. 195-9644
Fabrikantnummer4421012
€ 16,72
Each
Aantal stuks
- - Chrome Plated
RS-stocknr. 348-7371
FabrikantROCA
€ 26,86
Each
Aantal stuks
Lever Bolt Stainless Steel Electro Polished
RS-stocknr. 301-0088
Fabrikantnummer7603 C45
FabrikantVachette
€ 77,90
Each
Aantal stuks
Forend and Strike Steel Chrome Plated
Related Products
The catch is manufactured from fibre reinforced nylon, ...
Description:
The catch is manufactured from fibre reinforced nylon, being durable and corrosion resistantCan be screwed or riveted to door/frameMounts inside enclosureHeavy duty keeperPush to close, pull to openSpring loaded over centre actionAvailable in three pull forces.
Black, glass reinforced nylon, corrosion resistant, easy to ...
Description:
Black, glass reinforced nylon, corrosion resistant, easy to installAvailable in lockable and non-lockable versions with pull tab either in-line or perpendicular to the latching pawlCamlock designPush panel/door to lock, push the button to unlockMax panel thickness 10.3mm.
Silver powder coated mild steel case with satin ...
Description:
Silver powder coated mild steel case with satin nickel plated die cast zinc bolt and latchSatin finish, stainless steel forend and strike Designed to match the dimensional characteristics of DIN 18251 with follower to cylinder centres at 72mm. Case pierced ...
Lift and turn latches provide consistent, pre-set compression ...
Description:
Lift and turn latches provide consistent, pre-set compression against doors or panels A simple 2 step operation is required to latch: turn the handle to align the positioning pin in the pawl with a slot in the housing, then fold ...