Punches

Punch sets are ideal for punching neat holes in a variety of materials. Whether in textiles, woodworking or metalworking, a set of punch tools allows the operator to drive objects into the material, or form an impression on a workpiece. Sharp at one end, and hardened and flat at the other, a punch can be used with a hammer to achieve the desired results.


The RS range of punch sets includes several different types to suit your needs, from our own brand RS PRO and also well-known brands such as Bahco, Stanley, Gedore and Facom to name a few:


  • Centre Punch- A common type of punch with a semi blunted end. This is typically used to mark a centre for drilling in a piece. By creating a small recess for the drill bit to rest in, the drill is assured a greater chance of staying on course.
  • Drift Punch - Sometimes referred to as a pokey, this punching tool is often used for enlarging previously made holes. It can also be used for aligning holes prior to bolting.
  • Parallel Pin Punch - A parallel pin punch is often employed to remove pins from mechanical assemblies. When a pin is too tight to remove by hand, the correctly sized parallel pin punch can be employed to drive it loose.
  • Spring Pin Punch - Spring pin punches are used for removing roll pins, a type of mechanical fastener. For this reason, spring pin punches are also called roll pin punches and are specially shaped to remove roll pins without causing damage or becoming jammed.
  • Wad Punch - Have interchangeable heads and are used to cut accurate circles into textile materials. They can even be used on thin metal to make washers.
  • Anti-Vibration - With a shock-absorbing rubber handle, this punch not only offers the user maximum safety and comfort but also prevents clipping.

...
Lees meer Lees minder

Filters

21 - 40 van 122 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Overall Length Shank Diameter Number of Pieces Point Angle Punch Type
RS-stocknr. 784-5932
Fabrikantnummer249.GJ7
FabrikantFacom
€ 86,60
Each
Aantal stuks
- 8 → 14 mm 7 - Anti-Vibration
RS-stocknr. 547-638
Fabrikantnummer351BRS
FabrikantEclipse
€ 5,01
Each
Aantal stuks
- 4.0 mm 1 90° Fine Machine Point
RS-stocknr. 772-4400
Fabrikantnummer106 D
FabrikantGedore
€ 35,25
Each
Aantal stuks
- 10.0 mm 6 - Pin
RS-stocknr. 282-805
FabrikantnummerJ46
FabrikantStanley Proto
€ 202,73
Each
Aantal stuks
- 3/16 → 7/8 in 26 - Pin
RS-stocknr. 281-3527
Fabrikantnummer249.GPB
FabrikantFacom
€ 57,69
Each
Aantal stuks
- 3 → 8 mm 5 - Anti-Vibration
RS-stocknr. 510-153
FabrikantnummerDX620
FabrikantStarrett
€ 31,28
Each
Aantal stuks
- 1/8 → 3/8 in 5 - Pin
RS-stocknr. 381-4919
FabrikantRS PRO
€ 33,95
1 Set
Set(s)
- 3.2 → 9.5 mm 5 - Parallel Pin
RS-stocknr. 473-0698
FabrikantRS PRO
€ 2,12
Each
Aantal stuks
- 8.0 mm 1 - Centre
RS-stocknr. 282-782
FabrikantnummerJ2
FabrikantStanley Proto
€ 77,87
Each
Aantal stuks
- 1/4 → 7/16 in 12 - Pin
RS-stocknr. 772-4396
Fabrikantnummer119L
FabrikantGedore
€ 42,28
Each
Aantal stuks
- - 6 - Pin
RS-stocknr. 794-7713
Fabrikantnummer249.G2
FabrikantFacom
€ 11,21
Each
Aantal stuks
- 2.0 mm 1 - Drift
RS-stocknr. 737-2797
Fabrikantnummer70070003
FabrikantSTAHLWILLE
€ 8,73
Each
Aantal stuks
- 4.0 mm 1 - Parallel Pin
RS-stocknr. 456-3634
FabrikantRS PRO
€ 26,48
1 Set
Set(s)
- 3 → 4 mm 6 - Pin
RS-stocknr. 876-4884
Fabrikantnummer249.G4
FabrikantFacom
€ 11,77
Each
Aantal stuks
- 4.0 mm 1 - Pin
RS-stocknr. 875-4758
FabrikantRS PRO
€ 14,29
Each
Aantal stuks
- - 3 - Centre
RS-stocknr. 794-7858
Fabrikantnummer251A.1
FabrikantFacom
€ 10,43
Each
Aantal stuks
- 0.9 mm 1 - Drift
RS-stocknr. 794-7811
Fabrikantnummer249.2
FabrikantFacom
€ 7,43
Each
Aantal stuks
- 1.9 mm 1 - Drift
RS-stocknr. 794-7937
Fabrikantnummer256.4
FabrikantFacom
€ 5,15
Each
Aantal stuks
- 4.0 mm 1 - Centre
RS-stocknr. 473-0705
FabrikantRS PRO
€ 2,08
Each
Aantal stuks
- 10.0 mm 1 - Centre
RS-stocknr. 668-5755
FabrikantRS PRO
€ 5,59
Each
Aantal stuks
- 2.5 mm 1 - Centre