Ferrite Beads

"

Ferrite Beads also known as ferrite chokes are passive devices and they are used to constrict high-frequency signals in electronic components. The ferrite becomes resistive over its intended frequency range and uses up the noise energy in the form of heat.


How do the ferrite beads work?


The ferrite bead is connected in series with the power supply rail and is often combined with the capacitors to ground on either side of the bead. This then forms a low-pass filter network, further reducing the high-frequency power supply noise. Use SPICE (Simulation Program with Integrated Circuit Emphasis) or another similar tool to ensure any anti-resonance peaks caused by ferrite or PCB inductive structure does not violate the target impedance limit.


Ferrite Beads come in two categories:


High-Q Beads - typically used as resonators and must not be used in power isolation circuits


Low-Q Beads - these are also called absorptive beads and they are lossy and make good filter networks because they are designed to absorb high-frequency noise currents and dissipate it as heat


What to consider when choosing Ferrite Beads?


Make sure that any voltage drop does not cause the target supply rail to fall below the recommended operating conditions of the device


The ferrite bead is inductive, therefore do not use it with High-Q decoupling capacitors


Applying ferrite beads correctly can be an effective and inexpensive way to reduce high-frequency noise and switching transients


Where are Ferrite Beads used?


Eliminating high-frequency EMI noise on any circuit design


Electronic devices such as mobile phones


Computers and laptops


TV tuners


Audio Players


DVD’s


Gaming Systems

"

...
Lees meer Lees minder

Filters

81 - 100 van 1286 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Package Type Impedance at 25 MHz Impedance at 100 MHz Impedance at 300 MHz Impedance at 500 MHz Impedance at 1 GHz Current Rating Type Dimensions Length Depth Height Diameter Application
RS-stocknr. 669-4005
Fabrikantnummer74279262
FabrikantWurth Elektronik
€ 0,176
Each (In a Pack of 10)
Aantal stuks
0603 (1608M) - 120Ω - - - 500mA EMI Suppression 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - Suppression Components
RS-stocknr. 669-4080
Fabrikantnummer742792063
FabrikantWurth Elektronik
€ 0,196
Each (In a Pack of 10)
Aantal stuks
0805 (2012M) - 60Ω - - - 3A EMI Suppression 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - Suppression Components
RS-stocknr. 741-3135
FabrikantnummerMMZ1608R601AT
FabrikantTDK
€ 0,029
Each (In a Bag of 100)
Aantal stuks
0603 (1608M) - - - - - - Chip Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - Signal Line
RS-stocknr. 167-5787
FabrikantnummerBLM18KG221SN1D
FabrikantMurata
€ 76,29
1 Reel of 4000
Reel(s)
0603 (1608M) - 220Ω - - - 2.2A Chip Ferrite Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - EMI Suppression Filter, GHz Band Digital Interface
RS-stocknr. 166-9867
FabrikantnummerBLM21BB600SN1D
FabrikantMurata
€ 0,031
Each (On a Reel of 4000)
Aantal stuks
0805 (2012M) - 60Ω - - - 800mA Chip Ferrite Bead 2 x 1.25 x 0.85mm 2mm 1.25mm 0.85mm - EMI Suppression Filter, High Speed Signal Lines
RS-stocknr. 124-1838
Fabrikantnummer742792097
FabrikantWurth Elektronik
€ 0,215
Each (In a Pack of 50)
Aantal stuks
0805 (2012M) - 1500Ω - - - 1A Ferrite Bead 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - Suppression Components
RS-stocknr. 144-9850
Fabrikantnummer74279244
FabrikantWurth Elektronik
€ 0,227
Each (On a Reel of 2000)
Aantal stuks
1806 - 850Ω - - - 1.5A EMI Suppression 4.5 x 1.6 x 1.6mm 4.5mm 1.6mm 1.6mm - Suppression Components
RS-stocknr. 669-4171
Fabrikantnummer74279252
FabrikantWurth Elektronik
€ 0,265
Each (In a Pack of 10)
Aantal stuks
1812 (4532M) - 880Ω - - - 4A EMI Suppression 4.5 x 3.2 x 1.5mm 4.5mm 3.2mm 1.5mm - Suppression Components
RS-stocknr. 144-9851
Fabrikantnummer74279252
FabrikantWurth Elektronik
€ 0,186
Each (On a Reel of 1000)
Aantal stuks
1812 - 880Ω - - - 4A EMI Suppression 4.5 x 3.2 x 1.5mm 4.5mm 3.2mm 1.5mm - Suppression Components
RS-stocknr. 787-9939
Fabrikantnummer742792037
FabrikantWurth Elektronik
€ 0,206
Each (In a Bag of 10)
Aantal stuks
0805 (2012M) - 330Ω - - - 2A EMI Suppression 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - Suppression Components
RS-stocknr. 104-8515
FabrikantnummerBLM03AX241SN1D
FabrikantMurata
€ 0,059
Each (In a Pack of 200)
Aantal stuks
0603 (1608M) - 240Ω - - - 350mA Chip Bead 0.6 x 0.3 x 0.3mm 0.6mm 0.3mm 0.3mm - General Use
RS-stocknr. 110-548
FabrikantnummerBLM18BA121SN1D
FabrikantMurata
€ 0,059
Each (In a Bag of 25)
Aantal stuks
0603 (1608M) - 120Ω - - - 200mA Chip Ferrite Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - EMI Suppression Filter, High Speed Signal Lines
RS-stocknr. 792-6280
FabrikantnummerBLM18SG260TN1D
FabrikantMurata
€ 0,069
Each (In a Bag of 25)
Aantal stuks
0603 (1608M) - 26Ω - - - 6A Chip Ferrite Bead 1.6 x 0.8 x 0.5mm 1.6mm 0.8mm 0.5mm - Heavy Maintenace, Metal Surfaces
RS-stocknr. 669-4169
Fabrikantnummer74279244
FabrikantWurth Elektronik
€ 0,269
Each (In a Pack of 10)
Aantal stuks
1806 (4516M) - 850Ω - - - 1.5A EMI Suppression 4.5 x 1.6 x 1.6mm 4.5mm 1.6mm 1.6mm - Suppression Components
RS-stocknr. 724-1264
FabrikantnummerBLM15AG221SN1D
FabrikantMurata
€ 0,05
Each (In a Pack of 25)
Aantal stuks
0402 (1005M) - 220Ω - - - 450mA Chip Ferrite Bead 1 x 0.5 x 0.5mm 1mm 0.5mm 0.5mm - EMI Suppression Filter, General Use
RS-stocknr. 724-1390
FabrikantnummerBLM18PG221SN1D
FabrikantMurata
€ 0,05
Each (In a Pack of 25)
Aantal stuks
0603 (1608M) - 220Ω - - - 1.4A Chip Ferrite Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - EMI Suppression Filter, Power Supplies
RS-stocknr. 144-9787
Fabrikantnummer742792097
FabrikantWurth Elektronik
€ 563,20
1 Reel of 4000
Reel(s)
0805 - 1500Ω - - - 1A Ferrite Bead 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - Suppression Components
RS-stocknr. 111-0871
FabrikantnummerMPZ1608B471AT
FabrikantTDK
€ 0,023
Each (On a Reel of 4000)
Aantal stuks
0603 (1608M) - - - - - - Chip Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - Power Line
RS-stocknr. 888-3263
FabrikantnummerMI0805M221R-10
€ 0,053
Each (In a Pack of 500)
Aantal stuks
0805 (2012M) 100Ω 220Ω - - 115Ω 2.5A Chip Bead 2 x 1.25 x 0.9mm 2mm 1.25mm 0.9mm - Automotive, DSC, Energy and Utilities, General Electronics, Laptop, LCD-TV, Networking Devices, PC, Portable Devices etc., Security
RS-stocknr. 167-4819
FabrikantnummerBLM18SG260TN1D
FabrikantMurata
€ 0,026
Each (On a Reel of 10000)
Aantal stuks
0603 (1608M) - 26Ω - - - 6A Chip Ferrite Bead 1.6 x 0.8 x 0.5mm 1.6mm 0.8mm 0.5mm - Heavy Maintenace, Metal Surfaces
Related Products
Excellent anti-EMI properties and low DC resistancePlaced very ...
Description:
Excellent anti-EMI properties and low DC resistancePlaced very close next to the interference source even with smallest size 0402, maximum impedance 1000ΩReliable Ni-Sn electrodes Ideal for data line filtering and voltage de-couplingHigh rated current up to 6A Recommended for reflow ...
The BMB A Series of beads cover a ...
Description:
The BMB A Series of beads cover a wide range of impedance and frequency characteristics. The chip beads have a monolithic organic material construction that minimises the effect of electromagnetic interference. This series is suited to various applications. High soldering ...
BLM ferrite beads from Murata are ideal for ...
Description:
BLM ferrite beads from Murata are ideal for use in circuits with unstable ground lines as they do not require a ground connection. These ferrite beads are designed to function nearly as resistors at noise frequencies, leaving signal wave forms ...
High resistance to heat and humidityResistance to mechanical ...
Description:
High resistance to heat and humidityResistance to mechanical shock and pressureAccurate dimensions for automatic surface mountingWide inductance range (1.0 nH to 1000 uH)Lead freeApplicationsMobil phonesCellular phonesCTV, VCR, HIC, FDD.