Hydraulic Blanking Plugs

Hydraulic blanking plugs provide a temporary or permanent way of covering holes in high-pressure hydraulic devices. By sealing holes you can help to prevent leaks and ensure the device operates properly. Depending on their material, hydraulic blanking plugs are resistant to corrosion, oil and most chemicals. They have a threaded shaft and a flat head with a washer.

What are hydraulic blanking plugs used for?

Hydraulic blanking plugs are used in high pressure fluid applications such as presses, pumps, cylinders, valves, relays, motors, transmissions and turbos. Any blow-off or fault is prevented with a visible hydraulic bite rings on the progressive ring. Stress is evenly distributed throughout which minimises concentration at the bite point.

How to choose the right hydraulic blanking plugs

Hydraulic systems work at high pressures, applying extreme load and vibration to fittings. When choosing the right hydraulic blanking plugs, the technical specifications should be carefully considered. These factors include maximum temperature and pressure, as well as material. Steel hydraulic blanking plugs have a high resistance to corrosion, and plastic plugs are solvent, oil, grease and chemical resistant.


...
Lees meer Lees minder

Filters

1 - 20 van 37 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Material Finish Head Hex Type Thread Length Overall Length Thread Standard Thread Size Maximum Operating Temperature Minimum Operating Temperature Maximum Operating Pressure
RS-stocknr. 727-733
FabrikantnummerVSTI1/4EDCF
FabrikantParker
€ 2,604
Each (In a Pack of 5)
Aantal stuks
Steel Zinc Plated - 12mm 17.3mm G 1/4in +100°C -30°C 400 bar
RS-stocknr. 283-3385
Fabrikantnummer58295
FabrikantElesa-Clayton
€ 0,952
Each (In a Pack of 5)
Aantal stuks
Glass Fibre Reinforced Plastic (GRP) Matte - 9mm 16mm G 1/4in +130°C -30°C -
RS-stocknr. 727-727
FabrikantnummerVSTI1/8EDCF
FabrikantParker
€ 2,652
Each (In a Pack of 5)
Aantal stuks
Steel Zinc Plated - 8mm 12.3mm G 1/8in +100°C -30°C 400 bar
RS-stocknr. 727-749
FabrikantnummerVSTI3/8EDCF
FabrikantParker
€ 3,03
Each (In a Pack of 5)
Aantal stuks
Steel Zinc Plated - 12mm 17.3mm G 3/8in +100°C -30°C 400 bar
RS-stocknr. 283-3414
Fabrikantnummer58297
FabrikantElesa-Clayton
€ 1,378
Each (In a Pack of 5)
Aantal stuks
Glass Fibre Reinforced Plastic (GRP) Matte - 11mm 18mm G 1/2in +130°C -30°C -
RS-stocknr. 727-755
FabrikantnummerVSTI1/2EDCF
FabrikantParker
€ 4,984
Each (In a Pack of 5)
Aantal stuks
Steel Zinc Plated - 14mm 19.3mm G 1/2in +100°C -30°C 400 bar
RS-stocknr. 914-9501
Fabrikantnummer59727
FabrikantElesa-Clayton
€ 13,06
Each
Aantal stuks
Aluminium Black Anodised - 11.5mm 44mm G 3/4in +100°C -30°C -
RS-stocknr. 283-3357
Fabrikantnummer59811
FabrikantElesa-Clayton
€ 8,03
Each
Aantal stuks
Aluminium Matte Anodised - 11mm 18mm G 1/2in +130°C -30°C -
RS-stocknr. 498-334
Fabrikantnummer12 PNK 4S
FabrikantParker
€ 2,836
Each (In a Pack of 5)
Aantal stuks
Steel Yellow Chromated, Zinc Plated - - - G 3/4in +120°C -40°C 280 bar
RS-stocknr. 283-3379
Fabrikantnummer58294
FabrikantElesa-Clayton
€ 0,852
Each (In a Pack of 5)
Aantal stuks
Glass Fibre Reinforced Plastic (GRP) Matte - 9mm 16mm G 1/8in +130°C -30°C -
RS-stocknr. 727-777
FabrikantnummerVSTI1EDCF
FabrikantParker
€ 9,205
Each (In a Pack of 2)
Aantal stuks
Steel Zinc Plated - 16mm 22.8mm G 1in +100°C -30°C 400 bar
RS-stocknr. 871-2262
FabrikantnummerVSTI12x1.5EDCF
FabrikantParker
€ 4,43
Each
Aantal stuks
Steel Zinc Plated Hollow Hex 12mm 17mm Metric - - - 400 bar
RS-stocknr. 283-3329
Fabrikantnummer59791
FabrikantElesa-Clayton
€ 9,37
Each
Aantal stuks
Aluminium Matte Anodised - 9mm 15.5mm G 1/4in +130°C -30°C -
RS-stocknr. 141-7296
Fabrikantnummer58298-EX
FabrikantElesa
€ 2,52
1 Pack of 1
Pack(s)
- - - - - - - - - -
RS-stocknr. 871-2253
FabrikantnummerVSTI10X1EDCF
FabrikantParker
€ 3,24
Each
Aantal stuks
Steel Zinc Plated Hollow Hex 8mm 12mm Metric - - - 400 bar
RS-stocknr. 914-9505
Fabrikantnummer59729
FabrikantElesa-Clayton
€ 14,64
Each
Aantal stuks
Aluminium Black Anodised - 11.5mm 44mm G 1in +100°C -30°C -
RS-stocknr. 914-9482
Fabrikantnummer58411
FabrikantElesa-Clayton
€ 3,92
Each
Aantal stuks
Polyamide Based Technopolymer Matte - 14mm 24mm G 1-1/4in +100°C -30°C -
RS-stocknr. 498-312
Fabrikantnummer6PNK4S
FabrikantParker
€ 1,928
Each (In a Pack of 5)
Aantal stuks
Steel Yellow Chromated, Zinc Plated Hex Plug - - G 3/8in +120°C -40°C 380 bar
RS-stocknr. 283-3290
Fabrikantnummer58621
FabrikantElesa-Clayton
€ 0,95
Each (In a Pack of 5)
Aantal stuks
Glass Fibre Reinforced Plastic (GRP) Matte - 11mm 18mm G 1/2in +130°C -30°C -
RS-stocknr. 871-2265
FabrikantnummerVSTI14x1.5EDCF
FabrikantParker
€ 4,15
Each
Aantal stuks
Steel Zinc Plated Hollow Hex 12mm 17mm Metric - - - 400 bar
Related Products
Female parallel thread blanking cap. Manufactured from steel ...
Description:
Female parallel thread blanking cap. Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 to ...
Female parallel thread blanking cap. Manufactured from steel ...
Description:
Female parallel thread blanking cap. Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 to ...
Hexagon headed male parallel thread blanking plug. Manufactured ...
Description:
Hexagon headed male parallel thread blanking plug. Manufactured from steel to BS5200 with a zinc chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 ...
Blanking plugs for ports, male metric thread. Manufactured ...
Description:
Blanking plugs for ports, male metric thread. Manufactured from steel to BS5200 with a zinc chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C (-3 ...