Pneumatic Multi-Connector Fittings

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic multi-connector tube panels being one example.

What are pneumatic multi-connector tube panels used for?

Pneumatic multi-connector tube panels enable many different tubes to be connected together which is useful in complex pneumatic systems. They are commonly found in positive pressure and vacuum systems and allow a large number of hoses to be connected when the space available is small.

Types of pneumatic multi-connector tube panels

Pneumatic multi-connector tube panels come in a variety of diameters, thread sizes, grades and materials. These adaptors allow the user to change the connections in a system so multiple hoses can be attached.


...
Lees meer Lees minder

Filters

1 - 16 van 16 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Number of Outlet Ports Outlet Port Manufacturer Series Material Standards Met Suitable Media Maximum Operating Pressure Maximum Operating Temperature Minimum Operating Temperature
RS-stocknr. 847-7041
FabrikantnummerDM6-06N-C2
FabrikantSMC
€ 52,84
Each
Aantal stuks
6 Push In 6 mm DM Nylon - - 1 MPa +60°C -5°C
RS-stocknr. 245-3096
FabrikantnummerKDM10-06
FabrikantSMC
€ 84,17
Each
Aantal stuks
10 Push In 6 mm KDM Brass, PBT - - 1 MPa +60°C -5°C
RS-stocknr. 851-4330
FabrikantnummerDMK6P-04-C1
FabrikantSMC
€ 33,65
Each
Aantal stuks
6 Push In 4 mm DMK C3604BD, POM, 304 Stainless Steel - - 1 MPa +60°C -5°C
RS-stocknr. 245-3080
FabrikantnummerKDM10-04
FabrikantSMC
€ 84,17
Each
Aantal stuks
10 Push In 4 mm KDM Brass, PBT - - 1 MPa +60°C -5°C
RS-stocknr. 851-4563
FabrikantnummerDM12-04NU-C1
FabrikantSMC
€ 60,40
Each
Aantal stuks
12 Push In 4 mm DM C3604BD (Body), Soft Nylon Polyurethane (Tube) - - 1 MPa +60°C -5°C
RS-stocknr. 847-7477
FabrikantnummerDMK6-04
FabrikantSMC
€ 67,31
Each
Aantal stuks
6 Push In 4 mm DMK Nylon, Polyurethane, Soft Nylon - - 1 MPa +60°C -5°C
RS-stocknr. 847-7051
FabrikantnummerKDM20-01
FabrikantSMC
€ 74,27
Each
Aantal stuks
20 Push In 1/8 in KDM FEP, Nylon, PFA, Polyurethane, Soft Nylon - - 1 MPa +60°C -5°C
RS-stocknr. 851-4336
FabrikantnummerDMK12S-04-C1
FabrikantSMC
€ 50,89
Each
Aantal stuks
12 Push In 4 mm DMK C3604BD, POM, 304 Stainless Steel - - 1 MPa +60°C -5°C
RS-stocknr. 851-4333
FabrikantnummerDMK12P-04-C1
FabrikantSMC
€ 50,89
Each
Aantal stuks
12 Push In 4 mm DMK C3604BD, POM, 304 Stainless Steel - - 1 MPa +60°C -5°C
RS-stocknr. 912-0863
FabrikantnummerKDM20-06
FabrikantSMC
€ 159,05
Each
Aantal stuks
20 Push In 6 mm - Brass, PBT - - 1 MPa +60°C -5°C
RS-stocknr. 847-7473
FabrikantnummerDMK12-23
FabrikantSMC
€ 44,71
Each
Aantal stuks
12 Push In 3.2 mm DMK Nylon, Polyurethane, Soft Nylon - - 1 MPa +60°C -5°C
RS-stocknr. 847-7054
FabrikantnummerKDM10-01
FabrikantSMC
€ 36,89
Each
Aantal stuks
10 Push In 1/8 in KDM FEP, Nylon, PFA, Polyurethane, Soft Nylon - - 1 MPa +60°C -5°C
RS-stocknr. 847-7045
FabrikantnummerDM6-06NU-C2
FabrikantSMC
€ 52,84
Each
Aantal stuks
6 Push In 6 mm DM Polyurethane, Soft Nylon - - 1 MPa +60°C -5°C
RS-stocknr. 851-4349
FabrikantnummerDMK6S-04-C1
FabrikantSMC
€ 33,65
Each
Aantal stuks
6 Push In 4 mm DMK C3604BD, POM, 304 Stainless Steel - - 1 MPa +60°C -5°C
RS-stocknr. 847-7470
FabrikantnummerDMK12-04
FabrikantSMC
€ 101,78
Each
Aantal stuks
12 Push In 4 mm DMK Nylon, Polyurethane, Soft Nylon - - 1 MPa +60°C -5°C
RS-stocknr. 912-0853
FabrikantnummerDM6-06NU
FabrikantSMC
€ 46,05
Each
Aantal stuks
6 Push In 6 mm - - ISO 9001, ISO14001, JIS B 8370 Air 1 MPa +60°C -5°C