Pneumatic Grippers

Pneumatic grippers are devices designed to hold an object using pneumatic, electric or hydraulic operated jaws or fingers. Grippers can be used as single devices or as a part of pick and place, manufacturing systems. Grippers can be used to pick up/hold various size objects from very small items such as semiconductors to very large items like car chassis or engines. Grippers are frequently added to industrial robots in order to allow robots interactions with objects.

Grippers can be divided into 2 main categories by type of holding objects:
• External – the simplest and most popular method of holding objects. When the gripper jaws close, the closing force of the gripper holds that object.
• Internal – When the access to object’s exterior is required then an internal grip is necessary. Jaws or finger hold the object from the centre. In this case, the opening force of the gripper is used to hold the object.

What to consider when choosing the gripper:
• Shape , orientation and dimensional variation - If the object has two opposing flat surfaces, then 2 jaw parallel gripper is desired since it can handle some dimensional variation. Jaws can also be designed to handle cylindrical objects with the 2 jaw concept. Keep in mind that a retention or encompassing grip requires much less force.
• Weight - Grip force must be adequate to secure the object while the desired operation is performed on the object. The type of jaw design must be part of the force requirement. Keep in mind that you should add a safety factor to the amount of force that you select and air pressure is a factor to keep in mind.
• Accessibility- This applies both to the work being performed on the object and the amount of room for the gripper jaws. If the work is to the exterior of the object then it may require an internal grip. Angular grippers are usually less expensive but require additional space for jaw movement.
• Environmental - Harsh environment or clean room applications require grippers designed for those purposes.
• Retention of the Object - When air pressure is lost, the gripper will relax its grip on the object and the object may be dropped. There are spring assist grippers designed for this type application.

...
Lees meer Lees minder

Filters

1 - 20 van 85 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Manufacturer Series Action Number of Fingers Gripping Type Maximum Operating Pressure Absolute Maximum Pressure Cushioning Type Port Connection Weight
RS-stocknr. 700-7326
FabrikantnummerMHY2-10D
FabrikantSMC
€ 256,45
Each
Aantal stuks
MHY2 Double 2 Angle 0.6 MPa - - M5 x 0.8 70g
RS-stocknr. 768-1628
FabrikantnummerMHL2-20D
FabrikantSMC
€ 477,09
Each
Aantal stuks
MHL2 Double 2 Parallel 0.6 MPa - - M5 x 0.8 1kg
RS-stocknr. 841-2313
FabrikantnummerMHZ2-16D2
FabrikantSMC
€ 314,20
Each
Aantal stuks
MHZ Double 2 Parallel 0.1 → 0.7 MPa 0.7MPa Not Cushioned M5 x 0.8 115g
RS-stocknr. 841-2287
FabrikantnummerMHC2-16S
FabrikantSMC
€ 196,78
Each
Aantal stuks
MHC Single 2 Angle 0.25 → 0.6 MPa 0.6MPa Not Cushioned M5 x 0.8 92g
RS-stocknr. 700-7345
FabrikantnummerMHZ2-16D
FabrikantSMC
€ 317,34
Each
Aantal stuks
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 115g
RS-stocknr. 841-2375
FabrikantnummerMHZ2-10S
FabrikantSMC
€ 311,66
Each
Aantal stuks
MHZ Single 2 Parallel 0.35 → 0.7 MPa 0.7MPa Not Cushioned M3 x 0.5 55g
RS-stocknr. 841-2329
FabrikantnummerMHZJ2-10DS
FabrikantSMC
€ 385,83
Each
Aantal stuks
MHZ Double 2 Parallel 0.2 → 0.7 MPa 0.7MPa Not Cushioned M3 x 0.5 60g
RS-stocknr. 700-7285
FabrikantnummerMHF2-20D1
FabrikantSMC
€ 626,39
Each
Aantal stuks
MHF2 Double 2 Low Profile, Parallel 0.7 MPa - - M5 850g
RS-stocknr. 182-5838
FabrikantnummerMHC2-10D
FabrikantSMC
€ 182,00
Each
Aantal stuks
MHC2 Double 2 Angle 0.6 MPa - - M3 x 0.5 39g
RS-stocknr. 700-7304
FabrikantnummerMHL2-20D2
FabrikantSMC
€ 567,95
Each
Aantal stuks
MHL2 Double 2 Parallel 0.6 MPa - - M5 x 0.8 1.7kg
RS-stocknr. 700-7308
FabrikantnummerMHL2-25D2
FabrikantSMC
€ 652,15
Each
Aantal stuks
MHL2 Double 2 Parallel 0.6 MPa - - M5 x 0.8 2.8kg
RS-stocknr. 366-3604
FabrikantnummerMHZ2-16DN
FabrikantSMC
€ 311,60
Each
Aantal stuks
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 115g
RS-stocknr. 700-7348
FabrikantnummerMHZ2-20D
FabrikantSMC
€ 365,63
Each
Aantal stuks
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 235g
RS-stocknr. 841-2372
FabrikantnummerMHZ2-40D
FabrikantSMC
€ 769,14
Each
Aantal stuks
MHZ Double 2 Parallel 0.1 → 0.7 MPa 0.7MPa Not Cushioned M5 x 0.8 1.3kg
RS-stocknr. 182-5872
FabrikantnummerMHC2-25D
FabrikantSMC
€ 261,77
Each
Aantal stuks
MHC2 Double 2 Angle 0.6 MPa - - M5 x 0.8 311g
RS-stocknr. 182-5850
FabrikantnummerMHC2-16D
FabrikantSMC
€ 200,58
Each
Aantal stuks
MHC2 Double 2 Angle 0.6 MPa - - M5 x 0.8 91g
RS-stocknr. 478-056
FabrikantnummerMHY2-16D2
FabrikantSMC
€ 270,07
Each
Aantal stuks
MHY2 Double 2 Angle 0.6 MPa - - M5 x 0.8 150g
RS-stocknr. 366-3610
FabrikantnummerMHZ2-20DN
FabrikantSMC
€ 359,00
Each
Aantal stuks
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 235g
RS-stocknr. 841-2331
FabrikantnummerMHZL2-16D
FabrikantSMC
€ 310,52
Each
Aantal stuks
MHZ Double 2 Parallel 0.1 → 0.7 MPa 0.7MPa Not Cushioned M5 x 0.8 135g
RS-stocknr. 700-7281
FabrikantnummerMHF2-20D
FabrikantSMC
€ 572,59
Each
Aantal stuks
MHF2 Double 2 Low Profile, Parallel 0.7 MPa - - M5 645g
Related Products
Light and compact in four different sizesAuto switch ...
Description:
Light and compact in four different sizesAuto switch mounting at four locationsStainless steel fingers as standardImproved resistance to dusty environmentsDouble Acting180° Operating angleM5 connection portPressure range 1 → 6 bar.
Double actingOperating pressure 1 – 6 barTemperature range ...
Description:
Double actingOperating pressure 1 – 6 barTemperature range 0°C to 60°COpening angle 30°(open), 10°(closed)Holding moment at 5 bar is 0.1Nm (10mm bore), 0.4Nm (16mm), 0.7Nm (20mm), 1.4Nm (25mm)Repeatability of closing position ±0.01mmMaximum operating frequency 180cpmLubrication not required.
The MHL series from SMC are air grippers ...
Description:
The MHL series from SMC are air grippers ideal for gripping different sized parts. These pneumatic grippers are designed with dual piston construction creating a compact gripper with a large holding force. Wide opening air gripperParallel styleAuto switch capable.
High gripping forceStandard magnetic sensingHigh accuracy mountingIntegral guide ...
Description:
High gripping forceStandard magnetic sensingHigh accuracy mountingIntegral guide constructionRepeat accuracyAbrasion-resistant fingersOperating temperature -10°C → 60°COperating Pressure range for 10 mm bore 2 → 7 barOperating Pressure range for 16 → 25 mm bore 1 → 7 bar.