Cutters

Cutters are a hand held tool for cutting different materials.
Typical Types of Cutters
• Diagonal cutters are also known as side cutters. They are ideal for gripping, splicing or cutting wires, and strip insulation. They cut by indenting and wedging the wire apart and give a cleaner cut than using a knife.
• End cutters also known as nippers are used to cut through wire, springs, nails, bolts and rivets. They have an almost flat bladed head which lets you cut close against the surface without digging into it.
• Wire rope cutters for the clean shearing of wire rope without fanning. The jaws pull the wire rope into them and trap the cable.
• Bolt cutters are designed to send a large amount of torque to the cutting head to make cutting metal locks easy.
• Snipe nose or needle nose cutters are designed to hold and cut.

...
Lees meer Lees minder

Filters

41 - 60 van 227 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Model Number Non Sparking Type Overall Length Jaw Length VDE/1000V Approved Height Safe ESD Safe Material Maximum Cutting Capacity Cutting Capacity Copper Wire Cutting Capacity Ductile Wire Cutting Capacity Hard Wire Cutting Capacity Iron Wire
RS-stocknr. 288-910
Fabrikantnummer78 91 125 RS
FabrikantKnipex
€ 24,05
Each
Aantal stuks
- - Electronics Diagonal Cutters 125 mm - - - - - - - - - -
RS-stocknr. 847-8079
Fabrikantnummer8316-160 JC
FabrikantGedore
€ 30,50
Each
Aantal stuks
8316 JC - Side Cutter 160 mm 19mm - - - Steel 1.6mm - - - -
RS-stocknr. 297-2654
Fabrikantnummer197
FabrikantStanley
€ 122,39
Each
Aantal stuks
- - Diagonal 229 mm - - - - - 0.06in - - - -
RS-stocknr. 239-6101
Fabrikantnummer22204630
FabrikantErem by Weller
€ 67,00
Each
Aantal stuks
- - Angled Tip Cutter 4.25 in 15.01mm - - - - 0.024in - - - -
RS-stocknr. 187-8309
Fabrikantnummer64 42 115
FabrikantKnipex
€ 43,35
Each
Aantal stuks
- - Electronics End Cutting Nipper 115 mm 10mm - - - Tool Steel 1.5mm - - 0.5mm -
RS-stocknr. 787-0360
Fabrikantnummer25.E5151.CRBG
FabrikantIdealtek
€ 49,85
Each
Aantal stuks
- - Electronics Diagonal Cutters 125 mm 12.5mm - - Yes Ball Bearing Steel - - - - -
RS-stocknr. 834-8029
Fabrikantnummer3-981-15
FabrikantBernstein
€ 63,30
Each
Aantal stuks
- - Electronics End Cutting Nipper 135 mm - - - Yes Chrome Vanadium Steel 0.8mm - - - -
RS-stocknr. 787-0392
FabrikantnummerE5341
FabrikantIdealtek
€ 38,39
Each
Aantal stuks
- - Electronics Diagonal Cutters 125 mm 10mm - - Yes Ball Bearing Steel - - - - -
RS-stocknr. 772-4208
FabrikantnummerVDE 8314-140 H
FabrikantGedore
€ 25,08
Each
Aantal stuks
VDE 8314 - Side Cutter 140 mm - - - - - - - - - -
RS-stocknr. 847-2989
FabrikantnummerE5351.CRBG
FabrikantIdealtek
€ 49,85
Each
Aantal stuks
- - Electronics Diagonal Cutters 125 mm 12.5mm - - Yes Ball Bearing Steel 1.6mm - - - -
RS-stocknr. 540-1969
FabrikantRS PRO
€ 18,31
Each
Aantal stuks
- - Electronics Diagonal Cutters 138 mm - - - Yes - 1.02mm 1.02mm - - -
RS-stocknr. 442-0931
Fabrikantnummer25 02 160 SB
FabrikantKnipex
€ 20,85
Each
Aantal stuks
- - Snipe Nose Cutting Pliers 160 mm 50mm - - - Vanadium Electric Steel 2.5mm - - 1.6mm -
RS-stocknr. 910-7169
FabrikantnummerT3885
FabrikantCK
€ 12,67
Each
Aantal stuks
- - Electronics Diagonal Cutters 139 mm - - - Yes - - 1.3mm - - -
RS-stocknr. 910-7172
FabrikantnummerT3887
FabrikantCK
€ 13,00
Each
Aantal stuks
- - Electronics Diagonal Cutters 136 mm - - - Yes - - 1.6mm - - -
RS-stocknr. 187-8286
Fabrikantnummer64 22 115
FabrikantKnipex
€ 41,05
Each
Aantal stuks
- - Electronics End Cutting Nipper 115 mm - - - - Tool Steel 0.8mm - - - -
RS-stocknr. 124-6109
FabrikantnummerTAH2101G-160
FabrikantBahco
€ 41,15
Each
Aantal stuks
TAH2101G-160 - Side Cutter 160 mm 18mm - Yes - Alloy Steel 2 mm, 2.5 mm, 3.8 mm 3.8mm - - 2.5mm
RS-stocknr. 806-4914
Fabrikantnummer21HDG-160
FabrikantBahco
€ 33,95
Each
Aantal stuks
- - Side Cutter 160 mm 18mm - - - Alloy Steel 2.5mm - - - -
RS-stocknr. 297-1948
Fabrikantnummer26 17 200
FabrikantKnipex
€ 36,55
Each
Aantal stuks
- - Snipe Nose Cutting Pliers 200 mm 73mm Yes - - Vanadium Electric Steel 3.2mm - - 2.2mm -
RS-stocknr. 815-6388
Fabrikantnummer77 32 120 H
FabrikantKnipex
€ 114,25
Each
Aantal stuks
- - Electronics Diagonal Cutters 120 mm 14mm - - - Carbide 0.6mm - - 0.6mm -
RS-stocknr. 182-357
Fabrikantnummer2432E
FabrikantErem by Weller
€ 63,00
Each
Aantal stuks
- - Electronics Diagonal Cutters 130 mm 12mm - - Yes Tool Steel 1.6mm 1.6mm - - -
Related Products
RS Pro G12 Series insulated diagonal cutter. Ideal ...
Description:
RS Pro G12 Series insulated diagonal cutter. Ideal for working up to 1000 V ac or 1500 V dc. Suitable for cutting soft and hard wire. • Special tool steel • Chrome finish • DuoTech soft grip handles • VDE ...
The TriCut electric installation pliers, designed for 3 ...
Description:
The TriCut electric installation pliers, designed for 3 practical functions; cutting, skinning and stripping. Featuring a specially angled head to ensure that cables are stripped and skinned lengthwise along the cable. Using an ergonomic approach, which saves users from applying ...
Professional hand BiCut industrial cutters with diagonal blade. ...
Description:
Professional hand BiCut industrial cutters with diagonal blade. These clever high-performance cutting pliers give you twice the cutting force compared to that of standard pliers, using little hand strength. Featuring the ability to do the job of two pairs of ...
VDE Insulated diagonal cutters designed for professionals working ...
Description:
VDE Insulated diagonal cutters designed for professionals working with electrical components. These professional BiCut industrial cutting pliers, give you twice the cutting force compared to that of standard pliers, using little hand strength. Featuring the ability to do the job ...