Bearing Pullers

A bearing puller is a tool specifically designed to remove or install bearings from rotating machine shafts or from blind bearing holes. Dependant on the size of the puller, the application can vary dramatically, ranging from transmission to complicated industry machinery.


Where can a Bearing Puller be used?


One of the main uses of a bearing puller in within a car, removing a caged set of ball and tapered bearings from a rotary shaft. Different types of bearing pullers will depend on the application they are used for:


Hydraulic pullers are designed to pull any bearing, belt pulley, gear, round wheel or other tightened part used within the machinery industry. One of the main features of using a hydraulic version is that the job of removing or dismounting a bearing is much simpler, faster and safer.


Strong back pullers are used for easy insertion between bearing and shoulders on a shaft, featuring a spring operated centre point and a safety valve, minimising puller overload.


Heavy-duty jaw pullers are considered the most versatile, they offer easy and effective dismount of bearings. They offer minimal damage to a bearing, through the use of a jaw, the whole operation is of pulling a bearing is easy and safe. Jaws are commonly used in industrial and commercial environments.


Internal bearing pullers can be used for removing grooved ball bearings efficiently from shafts and cases without dismounting a bearing. This is known as a user friendly option because some gear puller sets feature an elastic retaining ring which helps keep the puller arm in position.


How Bearing Pullers work


Usually a hand powered tool or tool kit that features a handle on the turn screw, or a male hex end to match a drive socket. There are mechanical pullet sets, hydraulic puller sets, gear puller sets and standard bearing pullers available that mimic the same actions of the hand powered gear puller.


Features of a Puller Kit
  • Pullers are often made from tool grade steel, which means that they are harder than the materials that they are being used on. This ensures that they do not break when they are pulling bearings.

  • Reversible for internal or external uses

  • Two or three claw design

  • Spring loaded centre point

...
Lees meer Lees minder

Filters

1 - 20 van 85 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Capacity Hydraulic Force Operation Number of Pieces Case Material For Use With Jaw Reach
RS-stocknr. 349-7261
FabrikantRS PRO
€ 165,20
Each
Aantal stuks
- 8t Hydraulic 25 - - -
RS-stocknr. 732-4735
FabrikantnummerTMMK 10-35
FabrikantSKF
€ 1.034,93
Each
Aantal stuks
10 → 35 mm - Hand - - - -
RS-stocknr. 247-436
FabrikantnummerGEDORE 100-0705
FabrikantGedore
€ 126,64
1 Kit
Kit(s)
10 → 50 mm - Gear 9 Plastic - -
RS-stocknr. 237-776
FabrikantnummerGEDORE 9.00/3
FabrikantGedore
€ 179,97
1 Kit
Kit(s)
40 → 120 Spread mm 2t Lever Press 3 Plastic - -
RS-stocknr. 237-805
FabrikantnummerGEDORE 9.00/4
FabrikantGedore
€ 233,29
1 Kit
Kit(s)
5 → 60 mm, 40 → 120 mm, 90 mm, 110 mm - Gear 4 - - -
RS-stocknr. 612-5688
FabrikantnummerTMMA 60
FabrikantSKF
€ 390,40
Each
Aantal stuks
36 → 150 mm - Hydraulic - - - -
RS-stocknr. 349-7249
FabrikantRS PRO
€ 89,14
Each
Aantal stuks
- 10t Hydraulic 8 - - -
RS-stocknr. 189-538
FabrikantnummerTMIP 7-28
FabrikantSKF
€ 507,53
1 Kit
Kit(s)
7 → 9 mm, 10 → 12 mm, 15 → 17 mm, 20 → 28 mm - Hand 6 - - -
RS-stocknr. 434-2572
FabrikantRS PRO
€ 38,69
Each
Aantal stuks
19 → 45 mm - Lever Press 2 - - -
RS-stocknr. 349-7299
FabrikantRS PRO
€ 19,00
Each
Aantal stuks
100 mm - Lever Press - - - -
RS-stocknr. 123-0247
Fabrikantnummer10504635
FabrikantIrwin
€ 39,83
Each
Aantal stuks
- - - 5 - - -
RS-stocknr. 190-601
FabrikantnummerTMHC 110 E
FabrikantSKF
€ 1.033,34
1 Kit
Kit(s)
- 11.2t Hydraulic - - - -
RS-stocknr. 349-7306
FabrikantRS PRO
€ 32,02
Each
Aantal stuks
150 mm - Lever Press - - - -
RS-stocknr. 922-6226
FabrikantnummerTMMR 8F/SET
FabrikantSKF
€ 1.357,38
1 Kit
Kit(s)
- - Hand 10 - - -
RS-stocknr. 489-3402
Fabrikantnummer10504634
FabrikantIrwin
€ 47,94
Each
Aantal stuks
- - Hand - - - -
RS-stocknr. 612-5694
FabrikantnummerTMMD100
FabrikantSKF
€ 777,83
Each
Aantal stuks
10 → 100 mm - Hand 22 - - -
RS-stocknr. 237-798
FabrikantnummerGEDORE 9.00/1
FabrikantGedore
€ 166,64
1 Kit
Kit(s)
- - Gear 3 - - -
RS-stocknr. 124-8442
FabrikantnummerTMBS150E
FabrikantSKF
€ 819,48
Each
Aantal stuks
- - Hand 14 - - -
RS-stocknr. 349-7227
FabrikantRS PRO
€ 91,42
Each
Aantal stuks
- 10t Hydraulic - - - -
RS-stocknr. 434-2566
FabrikantRS PRO
€ 36,29
Each
Aantal stuks
50 mm - Hand 2 - - -
Related Products
2 Leg puller with quick release hooksSafe and ...
Description:
2 Leg puller with quick release hooksSafe and quick removal of pulleys, wheels, ball bearings etcStrong drop forged patternReversible hooks for internal or external pullingSpindle can be changed for a hydraulic spindleMaximum spread: 160mm, reach: 150mm (force screw: G 1/2 ...
3 Leg puller with quick release hooksSafe and ...
Description:
3 Leg puller with quick release hooksSafe and quick removal of pulleys, wheels, ball bearings etcStrong drop forged patternReversible hooks for internal or external pullingSpindle can be changed for a hydraulic spindleMaximum spread: 160mm, reach: 150mm (force screw: G 1/2 ...
Enerpac hydraulic puller sets contain both grip puller ...
Description:
Enerpac hydraulic puller sets contain both grip puller and cross bearing puller sets making them suitable for all pulling and pushing jobs in maintenance and repair. The puller sets are manufactured from forged steel for a long service life and ...
The TMHS 100 hydraulic spindle from SKF generates ...
Description:
The TMHS 100 hydraulic spindle from SKF generates a high pulling force with only a small amount of effort. Unlike standard mechanical spindles, they can dismount bearings in in a reduced time. The cylinder, pump and spindle are fully integrated ...