onsemi, AC/DC Converter 400 mA 78-Pin, PDIP NCP1075BBP130G
- RS-stocknr.:
- 178-4328
- Fabrikantnummer:
- NCP1075BBP130G
- Fabrikant:
- onsemi
Subtotaal (1 tube van 50 eenheden)*
€ 59,35
(excl. BTW)
€ 71,80
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk | Per tube* |
|---|---|---|
| 50 + | € 1,187 | € 59,35 |
*prijsindicatie
- RS-stocknr.:
- 178-4328
- Fabrikantnummer:
- NCP1075BBP130G
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Product Type | AC/DC Converter | |
| Maximum Input Voltage | 10V | |
| Mount Type | Through Hole | |
| Output Power | 14W | |
| Pin Count | 78 | |
| Switching Frequency | 130kHz | |
| Maximum Output Current | 400mA | |
| Package Type | PDIP | |
| Minimum Input Voltage | -0.3V | |
| Topology | Flyback | |
| Minimum Operating Temperature | 150°C | |
| Maximum Duty Cycle | 72% | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | No | |
| Series | NCP1075 | |
| Height | 3.43mm | |
| Length | 9.37mm | |
| Supply Current | 1.1mA | |
| Minimum Output Current | 400mA | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Product Type AC/DC Converter | ||
Maximum Input Voltage 10V | ||
Mount Type Through Hole | ||
Output Power 14W | ||
Pin Count 78 | ||
Switching Frequency 130kHz | ||
Maximum Output Current 400mA | ||
Package Type PDIP | ||
Minimum Input Voltage -0.3V | ||
Topology Flyback | ||
Minimum Operating Temperature 150°C | ||
Maximum Duty Cycle 72% | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals No | ||
Series NCP1075 | ||
Height 3.43mm | ||
Length 9.37mm | ||
Supply Current 1.1mA | ||
Minimum Output Current 400mA | ||
Automotive Standard No | ||
The NCP1075A & NCP1075B products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a two different pin out of the very common PDIP 7 package, it offers a high level of integration, including soft start, frequency jittering, short circuit protection, skip cycle, a maximum peak current set point, ramp compensation, and a dynamic self supply (DSS, eliminating the need for an auxiliary winding).
Up to 20W output SMPS design capability
Ability to scale for efficiency or size
Adjust output current protection based on output power demand
Eliminate acoustic noise
Eliminate Aux winding
Provides more robust protection without worrying about the coupling of the aux winding
Improved efficiency at light load / Improved EMI over the entire load
<50mW no Load Power Consumption
Better EMI Signature Over the Entire Operating Range
Enhanced Protection Against too Low or too High Input Voltage